Episode® Digital Subwoofer Amplifier - 300W
The Episode EA-AMP-SUB-1D-300 Digital Subwoofer Amplifier delivers 300 watts of clean power at 4 ohms, making it the perfect companion for our in-wall subs. This single-channel amplifier features convenient EQ modes, and variable power-on options, all wrapped in a 1U chassis.
Handy Connections
RCA line level connections allow you to connect additional amplifiers, while the 12V trigger allows you to connect another 12V trigger device; the amps also have dual sub outputs in parallel configuration.
Add Bass to Every Room
Deliver incredible audio throughout the home by pairing this sub amp with Episode’s new Dynamic amplifiers - with dedicated subwoofer outputs per zone.
Rack Mount Option
Whatever your installation requires, you will be prepared. At only 1U tall (1.75”), these amplifiers come with removable rubber feet and rack ears for direct rack mounting.
Multiple Power-on Options
Want the amplifiers always on? Don't want them on until they sense a signal? No wait, you want them to be controlled via a 12-volt trigger, right? The beautiful part is all three options are available to complement the ease of installation.
Optimized Controls
A rear-mounted rotary dial for crossover, phase, and volume control enables you to optimize any system for ultimate performance.
Custom EQ Settings
EQ modes are provided for fast and simple selection of music or movies.
Cool Performers
At the heart of these units is a highly-efficient digital power supply. This cool-running technology produces clean, tight bass.
Subsonic Filter
A limiter circuit has been included at the input stage to protect the connected woofer(s) from harsh, damaging distortion that can not only ruin the listening experience, but the woofers themselves.
| EA-AMP-SUB-1D-300 | |
|
Channels
|
1-Channel
|
|
Power Output @ 4 ohm
|
300W RMS
|
|
Power Output @ 8 ohm
|
150W RMS
|
|
Sensitivity Input
|
140 mV for full output (L/LFE only driven); 300W with level control set to max
|
|
Total Harmonic Distortion (THD)
|
0.10% 1W/2W 100Hz
|
|
Frequency Response
|
30-200Hz (EQ Mode to Bypass)
|
|
Certifications
|
TUV Listed & Tested under UL/EN60065 for US and Canada
|
|
Rack Spacing
|
1U
|
|
External Trigger Voltage
|
1-Channel
|
|
Sensitivity
|
Auto On: 4 mV
|
|
Dimensions (W x H x D)
|
1.75" x 16.9" x 8.1"
|
| 2.1" x 19" x 8.1" (with rack mounts & feet) | |
|
Weight
|
9.3 lb
|
