Imágenes adicionales
ES-HT900-IWLCR-6-A
ES-HT900-IWLCR-6-A
ES-HT900-IWLCR-6-A
ES-HT900-IWLCR-6-A

Altavoz Episode para Pared

Episode 900 Series In-Wall Home Theater LCR Speaker with Dual 6-1/2" Woofers (pieza)


Código: 01-ES-HT900-IWLCR-6

Episode® 900 Series Home Theater In-Wall LCR Speaker

This Episode® 900 Series In-Wall Home Theater LCR Speaker encompasses all of the best features that our 900 Series has to offer. A full-range speaker is perfect for two-channel stereo setup, or as part of the ultimate home theater system. You’ll appreciate the clarity and detail produced at a low-volume level, and a wide, natural sound stage at the high end. The combination of high-quality driver materials with our unique, NCS woofer material ribbon tweeter and dual 6-½” woofers offers remarkable performance time and time again.

@@altText

NCS Woofer

We've combined the strength of Kevlar® with the natural damping qualities of paper in a unique woofer material. A multi-step drying process during manufacturing enables these drivers to retain a natural, open cell structure that results in well-damped, neutral acoustic characteristics. The result is tighter bass with lower distortion. This speaker features two 6-1/2 in. versions of this driver, further enhancing low-frequency performance.

@@altText

Compensation Switches

Floor coverings, drapes, windows, and furniture all impact how a speaker sounds in a room. On this speaker, you can quickly adjust for bass boost on the woofers, or leave flat for Boundary Compensation and adjust the midrange and tweeter levels +/-2dB independently. In addition, the tweeter position gives an extra screen EQ boost of 3dB over 8 kHz for mounting behind perforated screens.

@@altText

Sealed Backbox

Our engineers designed a sealed enclosure made from rigid ¾” MDF. Sure, this costs more than typical “infinite baffle” (or open-backed) designs, but the rewards present themselves in more predictable performance – meaning that both you and your customers will enjoy that same Episode® quality, time and time again.

@@altText

An Installer's Dream

We believe that high-performance doesn’t have to mean high-frustration. Great care was taken to ensure these speakers install just as easily as our traditional in-walls. No amenities were overlooked, like integrated dog-toggles, wire channels, and bi-wiring / bi-amping support for premium performance and dynamic range in home theater applications.

Ribbon Tweeter

our engineers paired the NCS woofers with a premium 4.65" ribbon tweeter. This high-efficiency tweeter features powerful neodymium magnets and a lightweight Kapton® ribbon for unsurpassed sensitivity, frequency response and linearity. What’s more, the dispersion pattern has been specifically tuned for home theater applications – with a wide horizontal dispersion to put everyone in the sweet spot, while limiting the vertical dispersion to improve imaging by reducing undesirable ceiling and floor reflections.

Configurable Tweeter

These speakers are designed to be used “standing up” with the tweeter in a vertical orientation. But we all know there will be installations where a 30” tall speaker might not fit. That's why we designed the tweeter to be rotated for either vertical or horizontal use – perfect for tight center channel locations. There’s even a switch to optimize the crossover network for horizontal vs. vertical applications.

 

 

Woofer: Dual 6.5" NCS Cone, Aluminum phase bullet, High Temp Voice Coil
Tweeter: 4.65" Ribbon Kapton film with aluminum conductor traces / Neodynium magnet structure
Power Handling: 200W RMS, 500W Peak
Nominal Impedance: 8 ohms
Frequency Response
(-6dB):
65 Hz – 40 kHz
Sensitivity -2.83 V / 1 Meter: 89 dB
Adjustments: Woofers: Bass boost (0/+3dB), Tweeter: Level (+2dB/-2dB) plus screen EQ, Orientation: Horizontal/Vertical mounting.
Color: White
Crossover Frequency: 2.2 kHz
Connector Type: Bi-Amp / Wire via 5 Way all metal / gold plated Binding Posts
Weight: 26 lbs.
Grill Type: Magnetically Attached Steel Perf Mesh
Cutout Dimensions: 28.2" x 11.2"
Mounting Depth: 4.0"
Finished Dimensions: 29.63" H, 12.62" W, 4.56" D
Sold As: Each