-Angled-with-Grille---1605x1605.png)
-Angled-No-Grille---1605x1605.png)
-Front-No-Grille---1605x1605.png)
-Rear---1605x1605.png)
-Side---1605x1605.png)
Stage 260CSA
2-way 6.5in (166mm) Angled In-Ceiling Loudspeaker
The angled design of the Stage 260CSA allows for accurate aiming of the 6.5" (165mm) Polycellulose cone woofer and 1" (25mm) Aluminum dome tweeter with acoustic lens waveguide towards the listening area. A visually discrete zero bezel grille and easy installation allow these speakers to be heard and not seen. Elements including baffles with acoustic smoothing and acoustic lens tweeters have been incorporated into the design to ensure that the sound is clear and accurate.
Stage 260CSA
The angled design of the Stage 260CSA allows for accurate aiming of the 6.5" (165mm) Polycellulose cone woofer and 1" (25mm) Aluminum dome tweeter with acoustic lens waveguide towards the listening area. A visually discrete zero bezel grille and easy installation allow these speakers to be heard and not seen. Elements including baffles with acoustic smoothing and acoustic lens tweeters have been incorporated into the design to ensure that the sound is clear and accurate.
General Specifications
High Frequency Transducer
1" (25mm) Aluminum dome with Acoustic Lens
Low Frequency Transducer
6.5" (165mm) Polycellulose cone woofer
Recommended Amplifier Power (Full Range)
20-100W RMS
Frequency Response
50Hz-25kHz (-6dB on-axis)
Sensitivity (2.83V@1m)
87dB
Nominal Impedance
8ohm
Crossover Frequency
2800Hz
Inputs
Nickel-plated spring-loaded connectors
Grille Dimensions
H 9.8in (248mm) x W 9.8in (248mm)
Cutout Dimensions
H 8.6in (219mm) x W 8.6in (219mm)
Mounting Depth
5in (127mm)
Product Weight (Kg)
2.2Kg
Shipping Carton Dimensions
L 12in (306mm) x W 12in (306mm) x H 6.2in (158mm)
Shipping Carton Weight
6.66lbs (3.02Kg)
|
Install-Guide---JBL-Stage-2-Architectural---rev1.2---20221128-EN.pdf |
|
|
JBL-Stage-Architectural---Spec-Sheet---Rev1.3---20220718.pdf |
