-Angled-with-Grille---1605x1605.png)
-Angled-No-Grille---1605x1605.png)
-Front-No-Grille---1605x1605.png)
-Side---1605x1605.png)
-Rear---1605x1605.png)
Stage 260W
2-way 6.5in (166mm) In-Wall Loudspeaker
The Stage 260W has a 6.5" (165mm) Polycellulose cone woofer and 1" (25mm) Aluminum dome tweeter with an acoustic lens and HDI™ waveguide. A visually discrete zero bezel grille and easy installation allow these speakers to be heard and not seen. Elements including baffles with acoustic smoothing, acoustic lens tweeters, and patented High-Definition Imaging (HDItm) waveguide geometry have been incorporated into the design to ensure that the sound is clear and accurate.
Stage 260W
The Stage 260W has a 6.5" (165mm) Polycellulose cone woofer and 1" (25mm) Aluminum dome tweeter with an acoustic lens and HDI™ waveguide. A visually discrete zero bezel grille and easy installation allow these speakers to be heard and not seen. Elements including baffles with acoustic smoothing, acoustic lens tweeters, and patented High-Definition Imaging (HDItm) waveguide geometry have been incorporated into the design to ensure that the sound is clear and accurate.
General Specifications
High Frequency Transducer
1" (25mm) Aluminum dome with High-Definition Imaging (HDI™) Waveguide
Low Frequency Transducer
6.5" (165mm) Polycellulose cone woofer
Recommended Amplifier Power (Full Range)
20-100W RMS
Frequency Response
50Hz-25kHz (-6dB on-axis)
Sensitivity (2.83V@1m)
87dB
Nominal Impedance
8ohm
Crossover Frequency
1900Hz
Inputs
Nickel-plated spring-loaded connectors
Grille Dimensions
H 13.3in (339mm) x W 8.5in (217mm)
Cutout Dimensions
H 12.2in (311mm) x W 7.2in (184mm)
Mounting Depth
3.6in (92mm)
Product Weight (Kg)
2.2Kg
Shipping Carton Dimensions
L 15.6in (396mm) x W 10.8in (274mm) x H 5.1in (130mm)
Shipping Carton Weight
6.48lbs (2.94Kg)
|
Install-Guide---JBL-Stage-2-Architectural---rev1.2---20221128-EN.pdf |
|
|
JBL-Stage-Architectural---Spec-Sheet---Rev1.3---20220718.pdf |
