Imágenes adicionales
InGroundFamily_vert_medium
InGroundFamily_vert_medium
InGroundFamily_vert_medium

Led Martin

Configuracion de Reemplazo


Código: 05-INGROUND 4XX REPL NO RING/GLASS CONFIGUR

Features

  • Choice of premixed RGBW, single-color RGBW or variable CT white LEDs
  • Built-in glare shield for high visual comfort
  • Flush-mount and beveled trim ring options for installation in any groundwork
  • Choice of five beam angle options
  • Remote control and configuration via DMX and RDM
  • Rugged drive-over IP67 housing

 

Tech Specs

Physical

FixtureHeight: 315 mm (12.4 in.)Outer diameter at top of fixture: 310 mm (12.2 in.)Weight: 14.7 kg (32.5 lbs.)Top ring (trim ring)Flush-mount top ring outer diameter: 329 mm (13.0 in.)Flush-mount top ring thickness: 7 mm (0.3 in.)Beveled top ring outer diameter: 340 mm (13.4 in.)Beveled top ring thickness: 5 mm (0.2 in.)Installation SleeveInstallation sleeve height: 400 mm (15.8 in.)Installation sleeve base flange external diameter: 416 mm (16.4 in.)

 

Dynamic Effect

sAll modelsIntensity: 0 - 100%Exterior Inground 400 and 410Color mixing: RGBWExterior Inground 420Color temperature control: 2700 K - 6500 K

 

Control and Programming

All modelsControl systems: DMX, RDMDMX addressing and fixture setup: RDMFixture status monitoring: Multi-color status LED visible through top glassFirmware update: Serial upload via DMX linkDMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20Receiver: RS-485Exterior Inground 400 and 410DMX channels: 3/4Exterior Inground 420DMX channels: 2

 

Optics

All modelsLED manufacturer: CreeMinimum LED lifetime: 50 000 hours (to >70% luminous output)**Figure obtained under manufacturer's test conditionsExterior Inground 400Light source: R, G, B and W single-color LEDsBeam angle optionsNarrow diffuser: 10.5°Medium diffuser: 20°Wide diffuser: 41°Asymmetric diffuser: 52° x 12°Directional (8°): 67° x 24°Directional (20°): 69° x 24°Exterior Inground 410Light source: RGBW quad-color LEDsBeam angle optionsNarrow diffuser: 22°Medium diffuser: 29°Wide diffuser: 50°Asymmetric diffuser: 59° x 25°Directional (8°): 76° x 33°Directional (20°): 79° x 33°Exterior Inground 420Light source: Warm (2700 K) and cool (6500 K) LEDsBeam angle optionsNarrow diffuser: 10.5°Medium diffuser: 20°Wide diffuser: 41°Asymmetric diffuser: 52° x 12°Directional (8°): 67° x 24°Directional (20°): 69° x 24°

 

Photometric Data

Exterior Inground 400Maximum luminous output: 5700 lumensExterior Inground 410Maximum luminous output: 4800 lumensExterior Inground 420Maximum luminous output: 6600 lumens

 

Construction

Fixture housing: AluminumFront glass: 19 mm (0.8 in.) tempered glass (clear and anti-skid versions)Finish: Black powder coating over anodizingTrim ring (top ring): Stainless steelInstallation method: In installation sleeveColor: BlackCorrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)Protection rating: IP67Impact resistance: IK10RoHS compliantInstallation sleeve: Hot-dip galvanized steelWeight resistance (in installation sleeve with stable groundwork):4000 kg (from vehicle tire for example)

 

Installation

Installation method: Installation sleeve (ordered separately)Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)

 

Connections

Power connection: 1.8 m (5.9 ft.) cable tail without connectorData connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tailPower and data cable entries: IP68/69 cable glands

 

Electrical

AC power: 100-277 V~ nominal, 50/60 HzPower supply unit: Integrated, auto-sensing multi-voltagePower consumption, steady state, all LEDs at zero intensity: 11 WSurge protection: 4 KV

 

Typical Power and Current

120 V, 60 Hz: 1.3 A, 142 W, PF 0.99230 V, 50 Hz: 0.7 A, 142 W, PF 0.97Measurements made at nominal voltage. Allow for a deviation of +/- 10 %

 

Thermal

Cooling: Conduction / convectionMaximum ambient temperature (Ta max.): 45° C (113° F)Minimum ambient temperature (Ta min.): -30° C (-4° F), power must be maintained below 0° C (32° F)Maximum surface temperature, steady state, at 40° C ambient:65° C (149° F)Total heat dissipation (calculated, +/- 10%): 490 BTU/hr.

 

Approval

sEU safety: EN60598-2-5 (EN60598-1), EN60598-2-13, EN62471, EN62493EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5US safety: ANSI/UL 1598US EMC: 47 CFR Part 15 Class ACanadian safety: CSA C.22.2 No. 250Australia/NZ: RCM

Accessories

Installation sleeve for Inground 400: P/N 91611841Installation Lid for flush mount top ring installations: P/N 91616086Installation Lid for beveled top ring installations: P/N 91616087Please order Installation Sleeves separately from fixtures

 

Ordering Information

Inground 4xx, new install: P/N 90507100HUInground 4xx, replacement (for existing Inground 200 installations): P/N 90507150HUInground 4xx, replacement (for existing Inground 200 installations), no top ring or top glass: P/N 90507110HUProducts are ordered pre-configured by selecting from a range of options - see elsewhere on website or contact your Martin™ supplier

 

The Exterior™ Inground 400 series is a range of uncomplicated, easy-to-use color-changing LED luminaires. Perfect for installations with visible light sources, the Exterior Inground series combines the benefits of dynamic light and discreet installation. The recessed housing can be made to fit any type of surface with a trim ring available in beveled and flush-mount versions, for discreet installation both day and night.

The series is available in various configurations. The Exterior Inground 400™ has a narrow beam. The Exterior Inground 410™ blends the output of its RGBW LED sources in its lenses, delivering perfectly pre-mixed colors. And the Exterior Inground 420™ gives variable color temperature white light from 2700 to 6500 K.

  • Bright, efficient in-ground fixture with full LED color mixing
  • Advanced optical performance with uniform distribution of light and color
  • Durable, low-maintenance construction

Configurable design

The Exterior Inground 400 features a 19 mm tempered glass cover which is available either as clear glass or with an anti-skid surface for use in pedestrian areas. The top ring is available in flush or beveled mounting options and the entire installation can be carried out without breaking the factory seal.

 

Sturdy, waterproof construction

Cable glands and a separate connections compartment give a sealed unit with no water ingress via the factory-mounted DMX and power cables. The Inground 400 also features a Gore-Tex vent to equalize temperature-generated pressure fluctuation.

 

Clever status indication

The Exterior Inground 400’s intuitive LED status indicators allow for fast, convenient power and DMX status readings. Remote Device Management (RDM) allows more detailed readouts.

 

Built-in glare shield

A built-in glare shield effectively reduces glare from the LEDs, making the Exterior Inground 400 less distracting for pedestrians and leaving only the effect lighting to be enjoyed.