Imágenes adicionales
B-500-MTRX-230-16x16-A
B-500-MTRX-230-16x16-A
B-500-MTRX-230-16x16-A

Kit Matriz de video Binary

Binary 500 Series HDMI Matrix Switcher with HDMI and HDBaseT outputs, outputs, 16x16 inputs (pieza)Negro


Código: 01-B-500-MTRX-230-16x16

Binary™ HDMI 16x16 Matrix Switch with HDMI and HDBaseT Outputs
Built on a combination of our custom install expertise, the innovation of the Binary™ brand, and the ultra-reliable, proven platform of HDBaseT technology, the B-500-MTRX-230-16x16 is an installer s dream! It uses a single Cat5e/6 output to transmit HDMI signals and bi-directional IR from 16 sources to 16 displays – up to 230 feet with full 1080p video and support for Dolby TrueHD and DTS-HD Master audio. Whew – that s a mouthful! Plus it features true plug-and-play technology, so there are no EQ settings required for simple systems. And it comes equipped with everything needed for control system integration: Ethernet, RS-232 control, and IR routing to boot!
 

 

Important Notices:

Shielded Cable Recommendation
Although HDBaseT transmission technology is much less susceptible to EMI interference than other transmission technologies, if possible, it is recommended that you pull shielded Cat5e/Cat6 with this product for maximum reliability. Please note: for proper shielding, shielded connectors must be used with drains connected at both ends. In addition, “EZ end” connectors are not recommended for use with HDMI extenders.

Power Supply Voltage
Please use the 12V power supply included in the package. Use of power supply with a different voltage may cause damage to the product or the power supply.

Simultaneous HDMI & HDBaseT Outputs
Each output provides an HDMI output for local display(s), as well as an HDBaseT output for longer distances. Just pair the HDBaseT output with the optional receiver to achieve distances up to 230 feet. Best of all, both of these outputs can be used in parallel! A great example of this is for use with a preview monitor - connect the projector via the HDBaseT and the preview monitor via HDMI.

Integration Ready w/ Ethernet, RS-232 and IR Routing
To control the matrix itself, Ethernet, bi-directional RS-232 and IR are all available. But the goodies don't stop there – when using an optional HDBaseT receiver, the same Cat5e/6 cable that sends HDMI signals to the TV can also carry IR signals back to source components. And with built-in IR routing you don t have to worry about conflicting codes between devices. Need to send IR signals from a control system to the TV? No problem, the matrix has IR inputs for each room too – handy for sending commands to turn on TVs and change the volume, for example. For guaranteed performance, use Episode IR Products.

EDID Management: Work Smarter, Not Harder
Thanks to HDBaseT functionality, you don t have to fiddle with any EQ settings between the switcher and its receiver. Just plug and play – it doesn t get easier than that! And for more sophisticated systems, like those with varying display resolutions, EDID settings can be configured using the included remote control or convenient PC configuration utility. Three EDID modes are provided for ultimate flexibility - Auto, Embedded and Learning.

 

HDMI® (with 3D)
If you love acronyms, this 16X16 has you covered with full support of the HDMI® (with 3D), Deep Color (36bit) and HDCP 2.0 as well as support for Dolby® True HD, Dolby® Digital Plus, DTS™-HD Master and LPCM audio formats.


Software Toolkit
The included PC Configuration utility lets you easily manage EDID settings, test Inputs and outputs, update firmware and more.

Fast Switching, No Blinking
Fast switching (<3 seconds) ensures that you don't miss any of the action while waiting around for the video to sync! Plus, once a display is locked onto a source, there is no "blinking" of that display while other displays change sources.

Engineered by SnapAV
Under the hood of this 16X16 is an engineer s paradise! These surface-mount, high speed circuits (up to 6.75 Gbps) are built on a multi-layer board to give you reliable HDMI switching that supports current and future 3D technologies. "Engineered by SnapAV" – it s not just a saying, it s what we do.

Built-In ESD and Surge Protection
Intelligent circuit design perfected with feedback from extensive hardware qualification testing has resulted in a very robust product with excellent ESD and Surge protection. During development, every connection was tortured with an ESD gun and a lightning simulator. They were hit with ESD at 15KV and surges up to 2500V. More important, though, they each lived to tell about it!

Rack Mountable

Supplied rack ears make it easy to get this switcher securely mounted. Plus there are two power supply connectors – one on each side of the chassis – so you can run power wherever it s most convenient within your rack layout.




Product Contents
(1) B-500-MTRX-230-16x16
(1) 12V DC, 11.25A Power supply
(1) Owners manual
(2) Rack ears
(4) Mounting screws
(1) CD ROM
(1) IR Remote

 

Specifications
Technical
HDMI compliance HDMI 3D
HDCP Compliance Yes
Video bandwidth 6.75 Gbps
HDMI over UTP Transmission 1080i/720p 24-bit color: 200 ft (Cat5e/Cat6), 230 ft (Cat6a)
Full HD 1080p 24-bit color: 200 ft (Cat5e/Cat6), 230 ft (Cat6a)
Full HD 1080p 36-bit deep color: 200 ft (Cat5e/Cat6), 230 ft (Cat6a)
Input TMDS Signal 1.2 Volts (peak-to-peak)
Input DDC Signal 5 Volts (peak-to-peak, TTL)
ESD Protection (1) Human body model — ±15kV (air-gap discharge) &
±8kV (contact discharge) (2) Core chipset — ±8kV
IR Signal (Bi-directional) Carrier frequency: 20-60kHz
Connections
HDBaseT Link 16xRJ45
HDMI 32 x HDMI Type A (19-pin female)
IR (In) 1 x 3.5mm Mono
All IR (Out) 1x3.5mm Audio
IR Input to Room 16 x 3.5mm Mono
IR Output to Source 16 x 3.5mm Mono
RS-232 Control Port DB9
Power Polarized
Ethernet 1 x RJ45
Controls
DipSwitch1 Selecting RS232 or USB
Mechanical
Housing Metal Enclosure
Dimensions Width: 17.32" Height: 5.20" Depth: 12.72" (without ears)
Weight 21 lbs.
Power Supply 12V DC 11.25A
Power consumption 120w (max)
Operation Temperature 32 - 104F
Storage temperature -4 - 140F
Relative Humidity 20-90% RH (no condensation)
Certifications and Compliance Product: CE, FCC
Power Supply: CE, FCC, UL