Imágenes adicionales
WB-600-VCE-10-A
WB-600-VCE-10-A
WB-600-VCE-10-A
WB-600-VCE-10-A
WB-600-VCE-10-A
WB-600-VCE-10-A
WB-600-VCE-10-A

Acondicionador de voltaje Wattbox

WattBox Power Conditioner with Safe Voltage, Coax and Ethernet Protection 10 Outlets (pieza)Negro


Código: 01-WB-600-VCE-10

WattBox™ Power Conditioner with Safe Voltage, 10 Outlets - 5400J, 2 EMI/RFI Filters, 12V In, 2 Coax, 1 Ethernet (Display Opt.)
The WB-600-VCE-10 power conditioner provides versatile back-of-rack access to 10 outlets. A front panel display option provides voltage/current displays and utility outlets for charging peripherals. All connected equipment is safe and sound thanks to best-in-class surge protection of power, coax, and telephone/Ethernet – plus noise filtration for purer audio/video performance. The WB-600-SVCE-10 also includes Safe Voltage protection, a feature that disconnects connected equipment when there is sustained over/under voltage and reconnects when the voltage returns to a safe level.And to ensure this product stands the tests of time, it s built it like
a tank with an 18 gauge steel chassis. Now THAT S professional grade power.

Important Note: This Wattbox power conditioner features switched outlets that are designed for control using the power button on the unit, the optional faceplate or a 12V trigger from a control system. If your application only calls for always on outlets, with no control, check out our 400-series Wattbox products.

 

FEATURES

  • Optional Faceplate

    Optional Display with Auxiliary Outlets
  • Fireproof MOV

    Ceramic Encased Surge Components
  • Total Outlets

    4 Always On,
    6 Switched
  • Filter Banks

    2 Isolated Noise Filters
  • Safe Voltage

    Protects Against Under and Over Voltage
  • 12V Trigger

    Remote Power On for System Integration
  • Surge Protection

    Energy Dissipation
 

INSTALLER FRIENDLY

Rack Mount Versatility
Normal chassis-based power products put the outlets closer to the front of the rack, making them tough to reach and in some cases impossible to use wall warts. That just didn't make sense - so our engineers came up with a better way with the patent-pending WattBox design. Exclusive back-of-rack mounting puts those hard-to-reach outlets where you need them most. And the included brackets let you mount it in any direction - straight on for traditional installation, up/down/angled for increased visibility when installed at the top or bottom of the rack, you can even recess it for easier cable management and to reduce depth.

Cabinet/Shelf Mounting
Whether you're installing into a rack, shelf, or cabinet, we have you covered! Simply turn the small bracket around backwards and the surge protector can easily mount in the back of a cabinet or on a wall. Turn the bracket facing down, apply the included feet and you can quickly secure it to a shelf or the top of the cabinet.

Optional Faceplate w/ Display
With competitive chassis-based power products, the faceplate, controls and front outlets have to follow the rear outlets. With the optional patent-pending Wattbox faceplate, you can position the front display wherever you want, regardless of where you've placed the rear outlets. It provides easy access to utility outlets, input voltage and current readouts, USB charging and a convenient power button for system resets or a power-saving vacation mode. The faceplate and power conditioner connect using a short extension cord and RJ45 cable. NOTE: For surge protection of the faceplate and its utility outlets, you must connect it via the “DISPLAY LINK” ports on the back of the 600-series power conditioner.


Less is More
Other manufacturers pad their chassis with lots of dead space in a failed attempt to get the outlets near the back of the rack. This adds cost, wastes space – and more important, really doesn t solve the problem of outlet accessibility. The back-of-rack Wattbox design gets the outlets where you need them and removes the unnecessary bulk to give you more room in the rack.


Power Adapters Welcome
We've been there before - you get all the power cords just where you want them, only to forget about the "wall wart" for the IR block or the network switch or the... Then you have to undo something just to make it all fit - oh... and then the bulky "wart" covers up the outlet next to it! To solve this, we have spaced the outlets as far apart as possible and turned them 90-degrees so every outlet can be used. And since those bulky power supplies are prone to falling out, we even supply tie-down straps to keep them in place.

12V Trigger Input
A 12V DC input is provided to allow triggering from a control system or other component. For example, hook the A/V receiver to the always on outlet then use its 12V trigger output to feed back to the power conditioner's 12V input. Just turn on the receiver and all other source components turn on, too.

PROTECTION & CONDITIONING

Safe Voltage
Ever noticed a light that dimmed for a few seconds during a storm? This low-voltage condition is typically caused by power grid issues - and it can have an adverse effect on your equipment. WattBox Safe Voltage will protect your gear by automatically disconnecting it during sustained under AND over voltage conditions. When the input voltage returns to a safe level, the equipment will be reconnected automatically.

Noise Filtration
Sensitive A/V equipment is negatively impacted by noisy appliances and other electronics that create interference on the AC line. All Wattbox power conditioners feature noise filtration that cleans up this "dirty power" to deliver the purest A/V experience possible. By lowering the audio noise floor and reducing hum, you hear exactly what was intended. Video performance can see an improvement too - with reduced power-related artifacts on HD displays.

 

Isolated Filter Banks
Not only can noise come from incoming AC line itself, but it is also generated within the system by other components - especially digital devices with switching power supplies and rack fans. The WB-600-VCE-10 features two independently isolated filter banks to eliminate cross contamination of noise between components. We recommend using one bank for digital source components such as BluRay players and cable/satellite boxes, another for high-current devices such as A/V receivers and amplifiers, and the third back for sensitive high-speed, networking equipment, AppleTV and control systems.

Surge Protection
Surges can come from a variety of sources - from fluctuations at the power company to catastrophic events such as lightning. This excess energy can damage your connected equipment if not properly protected. The Joule rating is a measure of a surge protector's ability to "clamp" this excess energy down to a safe level - the higher the rating, the more protection your equipment has.

Fireproof MOVs
MOVs, or Metal Oxide Varistors, are surge protection components that dissipate excess energy in the form of heat. Under extreme conditions, lower quality MOVs can get so hot they catch on fire! Wattbox power conditioners feature ceramic-encased MOVs to protect not only your system but your home as well.

AC Disconnect
As an added precaution, in the event of a catastrophic spike, a thermal fuse completely disconnects AC power from your system to stop the surge in its tracks before it can get to your connected equipment. All three "legs" of the power (hot, neutral and ground) will disconnect for unsurpassed equipment protection.

 

Coax, Telephone/Ethernet Protection
Not only can surges creep in on the power, but also telephone, coax and network connections. Jacks for RJ11 or RJ45 connections are provided with full protection on all 8 pins for telephone and Ethernet applications. Today's sophisticated HD cable and satellite systems have higher bandwidth requirements than they did even a few years ago. Dual 3 GHz coax connections not only protect you against surge, but they deliver premium signal quality with less than 1 dB of attenuation. Pass-through voltage is supported for satellite systems.

 

GENERAL

Always On Outlets
Use the always on outlets for DVRs, network switches and control systems to ensure that critical devices are ready when you need them. A green LED illuminates to indicate power is being supplied to each outlet. NOTE: These outlets will only be turned off when Safe Voltage is protecting from a sustained under/over voltage condition.

Flexible Power Cable
Bulky power cables can cause all sorts of frustration when installing in a cabinet or rack. This WattBox 600-series power conditioner includes a 6 ft, detachable IEC cord that is super-flexible for easy wire management. The connector is gold plated to resist corrosion and minimize loss. There's also a locking clip to prevent accidental removal. For custom lengths, replacement cordsare available from 6 inches long up to 15 feet.

Cord Labels
Pick a card, any card. Sometimes it can feel like a guessing game when you're servicing equipment and trying to figure out which outlet goes to what piece of gear. To prevent this, apply the supplied labels to each cord and know exactly what's what.

Ground Lug
Improper system grounding can lead to audio hum, video scan bars and all sorts of other nasty artifacts. This power conditioner provides a common grounding point for system components using ground leads, such as cable/satellite splitters.

 

Specifications

AC Power
Line Voltage 120V, 60Hz
AC Input Connection IEC C-14
Power Cord Length 6 Feet
Circuit Breaker Rating 15A
UL Current Rating 12A
Voltage Protection Rating (UL 1449 3rd Edition) 500V
Joule Rating 5400 Joules
Surge Component Ceramic Encased MOV
Protection Modes L-N, L-G, N-G
Peak Impulse Current 360,000A
Disconnect Circuitry Yes
Thermal Fuse Yes
Safe Voltage Disconnect
Over Voltage 138 VAC + 5 VAC
Under Voltage 88 VAC + 5 VAC
EMI / RFI Noise Filtration
Filter Banks 1 & 2 80 dB, 300 kHz to 100 MHz
Display Link Outputs
Display Communication RJ45
Display Power NEMA 5-15
Cable / Satellite Circuit
Connections Gold Plated "F" Connector
Surge Component Gas Tube
Clamping Voltage 600V
Frequency Range 0MHz - 3.0 GHz
Insertion Loss < 0.5 dB
Shielded Yes
Bi-directional Yes
Phone / LAN Circuit
Jacks RJ45
Accepts RJ11 & RJ45
Surge Component Sidactor & MOV
Clamping Voltage RJ11:400V; RJ45:250V
Wires Protected 8 Wires
Outlets
Type NEMA 5-15
Numer of Outlets 10
Always On Bank 1 (4 Outlets)
Switched Bank 2 (6 Outlets)
UL Certifications
UL 60950-1, UL 1449, UL 498, UL 497A/B, UL 1283  
Dimensions
3.47" H x 17.02" W x 3.47" D