Cool Components™ 4-Fan Component Cooling Unit with Power Supply
The CP-CC-4FN is a very aggressive and versatile full-sized cooling unit. It pulls air away from components thus protecting equipment from heat accumulations and failures. It features 4 high-quality 92mm Levitation fans that are mounted using a special vibratiion-damping system that allows you to pull air up or down by simply alternating the fans. It runs on DC voltage and comes with an adjustable power supply to accommodate many installation needs with different levels of cooling capabilities, making it a fantastic unit for cooilng amplifiers and recievers in racks or simply sitting directly ontop of equipment in cabinet/closet installations.
Instead of passively allowing the component to cool, the four fans speed up the process by acting like a heat sink and pull the hot air away from the component which promotes longer lasting equipment.
Variable Voltage Power Supply
Each unit comes with a variable AC to DC voltage regulator. This means that you can switch the fan from 7 - 12V and control the speed of the fan for to the specific situation.
The maximum decibel level reached is around 28 db, or just louder than a whisper. Since the fan is provided with an adjustable power supply to increase or decrease the speed of the blowers, you are able to accommodate quiet situations when necessary (in-room applications) or open full throttle when not ( in a utility closet).
With special high tensile rubber that acts as a damping system, you can adjust the direction of the fan to either pull air out or push air in - which allows you to pull air up and away if sitting on top or down and away if component is on top.
This unit is compatible with the TC-ALT, for when you want to let the temperature itself control the speed of the fan and use less power when possible.
To Be or Not to Be…in a Rack
Each unit comes with both high temperature-resistant feet and rack ears, allowing you to sit it directly on top of a piece of equipment or mount it directly to a rack. Either way, you are only utilizing a 1U space.
Power Supply (PS-1000)
Rack Mounting Hardware
(4) Rubber Feet
|Power Specifications||Connection: 2-Pin FastWire Power System
Voltage: 7 to 12V DC
Current - Amp: 800 milliamps at 12VDC
|Noise Level||Dependepnt on System Settings and Options|
|AirFlow||120 CFM - 260 CFM|
|Dimensions||Width: 17" Height: 1.7" Depth: 13.4"|
|Fans (Quantity)||(4) 92mm Brushless Levitation Fans with Vapo Bearings (Est. 50,000 hr)|
|Rack Spacing (1U, 2U, 3U)||1U|