OVERVIEW
Wall Controllers are stand-alone, dual-gang IP controllers that send commands to multiple IP clients with the push of a button. N-Series Controllers have nine programmable tactile buttons with a 240 x 320 display. Programming is done individually through the built-in web-server or collectively to multiple units using N-Command Control Appliances. Multi-page custom graphics can be created using Panel Builder software, stored internally, and launched at start-up or at the push of a button. The SC-TC-D comes with a capacitive touch display and built-in WiFi and Bluetooth for expanding control to mobile devices.
FEATURES
< >Cost Effective - Low cost of installationMultiple Commands - Sent to multiple TCP/IP clientsPoE - Robust Power over Ethernet (PoE) reliability and redundancyEnergy Efficient - Standard PoE consumptionEU Compliance - Supports both US and European wiring standards
SPECIFICATIONS
CONNECTIONS AND MANAGEMENT
- Power and Data Connection
- 8-wire RJ45 female Power over Ethernet (PoE)/100Base-T connector provides both the network connection and the power to the Wall Controller. Units must be powered via a PoE switch or other equipment with a PoE source
- Conforms to IEEE 802.3af Class 3 (802.3at Type 1).
- PoE Consumption: 2.5W
- WiFi
- Internal 2.4Ghz 802.11g wireless access point (optionally bridged to the wired connection)
- Max Transmit Power: 14.5 dBm, 54 Mbps OFDM (g)
- Max Receive Sensitivity: -76 dBm, 54 Mbps OFDM (g)
- Bluetooth
- Bluetooth V4.0 Low Energy (BLE) - Beacon Service only
- BLE Beacon is used in conjunction with SVSi Mobile App to initiate WiFi connection on device to connect and display a Panel Project specified by settings
- Command Protocols: TCP or UDP
- Graphic Formats: GIF, JPG, and PNG
- Management: Built-in web server, N-Able, and N-Command N8000 Series controller
Note: In order for the unit to receive PoE, it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only.
INTERFACE
- Tactile Buttons: Eight user-defined tactile buttons. Each button can be defined differently for each panel (allowing for an unlimited number of functions to be button-controllable)
- Soft Buttons: User-defined soft buttons (which can also be defined differently for each panel as described above).
- Display: 3.5" 240x320 touch screen
ENVIRONMENTAL
- Temperature: 32° to 104°F (0° to 40°C)
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: Up to ~44 BTU/Hr
GENERAL
- Dimensions (HWD): 4.5" x 4.5" x 1.5" (11.43 cm x 11.43 cm x 3.8 cm)
- Weight: 0.5 lbs (0.23 kg)
- Mounting Options: Flush mount or mount into an existing electrical box using adapter ring
- Regulatory Compliance:FCC, CE, and NTRL
SVSIPanelBuilder.ScriptingTutorial.pdf | |
SVSIPanelBuilder.Tutorial.pdf | |
SVSIWallControllers.CutOutTemplate.pdf | |
SVSIWallControllers.QuickStartGuide.pdf | |
SVSIWallControllers.UserManual.pdf |