OVERVIEW
The Modero X/S Series Multi Preview is a touch panel accessory that displays up to 10 preview images on Modero X and Modero S Series Touch Panels when used in conjunction with an Enova DVX All-In-One Presentation Switcher or Enova DGX Digital Media Switcher. The MXA-MP accepts most analog or digital video input signals through the multi-format DVI input and converts them to JPEG preview images for display on panels. The MXA-MP makes it easy for users to quickly identify what is currently being displayed by up to 10 source devices.
COMMON APPLICATIONS
Use the MXA-MP to preview a snapshot of the content from a source device before switching to that source.
FEATURES
< >Updates all 10 preview images sequentially or one image continuouslyConverts video sources into video snapshotsEasily add to existing implementations that use an Enova DGX or Enova DVX with a Modero X Series Touch Panel
WEIGHT
2.80 lbs (1.27 kg)
POWER
- IEC power cord connector
- 100-240 VAC
- 47-63 Hz
- Power Consumption without Panel: 120VAC at 170ma, 20W
- Power Consumption with Panel: 120VAC at 410ma, 50W
- Start-Up Inrush Current: 17.2 A at 116.8 VAC for 80 µsec
EXTERNAL POWER SUPPLY INCLUDED
- MIC AC Universal Power Cord (CA1090-131)
- Note: If using the MXA-MPL in conjunction with a touch panel that requires a PoE power supply please see the requirements of the touch panel and include an AMX supported PoE solution. The MXA-MPL does not provide PoE power to the touch panel.
VIDEO
- Video Preview Image Format: JPEG (accessed over HTTP)
- Max Number of Video Preview Images: 10
- Min Refresh Time of Preview Images: 2 sec per preview image
- Video Input: HDMI, DVI, RGBHV, S-Video, composite or component video
- Video Input Resolutions:
- HDMI: 640x480p@60Hz, 800x600p@60Hz, 1024x768p@60Hz, 1280x720p@60Hz
- DVI: 640x480p@60Hz, 800x600p@60Hz, 1024x768p@60Hz, 1280x720p@60Hz
- RGB/GRAPHICS: 640x480p@60Hz, 800x600p@60Hz, 1024x768p@60Hz, 1280x768p@60Hz
- COMPONENT: 720x480i@60Hz, 720x480p@60Hz, 720x576i@50Hz, 720x576p@50Hz
- SVIDEO: ntsc, pal-bghid, pal-m
- COMPOSITE: ntsc, pal-bghid, pal-m
COMMUNICATIONS
Ethernet: 10/100 port, RJ-45 connector with Ethernet/IP pass-through
FRONT PANEL COMPONENTS
- Power: (1) LED (green) lights when device is receiving power
- Status: (1) LED toggles on/off green every 5 seconds if communicating to the panel (i.e. the panel is configured to use the MXA-MP)
- Video Input: (1) LED (red) lights when receiving video signals
- LAN: (1) LED (green) lights when the LAN connection is enabled
- Panel: (1) LED (green) lights when device is connected to the panel
- Reset Button: Reboots the unit when pressed
- Factory Reset Button: Resets the unit to factory defaults when pressed for at least 5 seconds
REAR PANEL COMPONENTS
- DVI-I: DVI-I multi-format video input
- HDMI: HDMI preview video output
- Analog Audio Jack: 1/8th-inch mini-jack input (not used)
- Power Output: 2-pin 3.5 mm Phoenix-style connector output, 12 Volts, 3 Amps
- Ethernet In: (1) 10/100 port, RJ-45 connector for connection to network
- Ethernet Out: (1) 10/100 port, RJ-45 connector for connection to touch panel
- Power: IEC power cord connector
ENVIRONMENTAL
- Temperature (Operating): 32° F to 104° F (0° C to 40° C)
- Temperature (Storage): 4° F to 140° F (-20° C to 60° C)
- Humidity (Operating): 20% to 85% RH
- Humidity (Storage): 5% to 85% RH
- Power ("Heat") Dissipation without Panel: 68 BTU/hr
- Power ("Heat") Dissipation with Panel: 170 BTU/hr
REGULATORY COMPLIANCE
- FCC Part 15 Class A
- CE EN 55022
- CE EN 55024
- CE EN 60065
- IEC 60065
- IC
- UL 60065
- RoHS
- WEEE
INCLUDED ACCESSORIES
- MXA-MP Installation Guide (93-5968-20)
- MIC AC Universal Power Cord (CA1090-131)
OPTIONAL ACCESSORIES
- MPA-VRK, Rack Shelf 1RU 7.3" Depth (FG5968-30)
- AC-SMB, Surface Mount Bracket Accessory (FG525)
- CC-3.5ST5-RCA2F, 5-pin 3.5mm Phoenix-style to 2 RCA Female Cable (FG10-003-20)
95-5968-10_REV-C.pdf | |
DigitalMediaCapabilities.ModeroXSeries.TouchPanels.WhitePaper.pdf | |
MXA-MP.DataSheet.pdf | |
MXA-MP.QuickStartGuide.pdf | |
MXA-MP_MXA-MPL_InstructionManual.pdf |