Networked AV AMX

Wall Controllers are stand-alone, dual-gang IP controllers that send commands to multiple IP clients with the push of a button. N-Series Controllers have nine programmable tactile buttons with a 240 x 320 display. Programming is done individually through the built-in web-server or collectively to multiple units using N-Command Control Appliances. Multi-page custom graphics can be created using Panel Builder software, stored internally, and launched at start-up or at the push of a button. The SC-TC-D comes with a capacitive touch display and built-in WiFi and Bluetooth for expanding control to mobile devices.

FEATURES 

< >Cost Effective - Low cost of installationMultiple Commands - Sent to multiple TCP/IP clientsPoE - Robust Power over Ethernet (PoE) reliability and redundancyEnergy Efficient - Standard PoE consumptionEU Compliance - Supports both US and European wiring standards

SPECIFICATIONS

CONNECTIONS AND MANAGEMENT

• Power and Data Connection
  • 8-wire RJ45 female Power over Ethernet (PoE)/100Base-T connector provides both the network connection and the power to the Wall Controller. Units must be powered via a PoE switch or other equipment with a PoE source
  • Conforms to IEEE 802.3af Class 3 (802.3at Type 1).
• PoE Consumption: 2.5W
• WiFi
  • Internal 2.4Ghz 802.11g wireless access point (optionally bridged to the wired connection)
  • Max Transmit Power: 14.5 dBm, 54 Mbps OFDM (g)
  • Max Receive Sensitivity: -76 dBm, 54 Mbps OFDM (g)
• Bluetooth
  • Bluetooth V4.0 Low Energy (BLE) - Beacon Service only
  • BLE Beacon is used in conjunction with SVSi Mobile App to initiate WiFi connection on device to connect and display a Panel Project specified by settings
• Command Protocols: TCP or UDP
• Graphic Formats: GIF, JPG, and PNG
• Management: Built-in web server, N-Able, and N-Command N8000 Series controller

Note: In order for the unit to receive PoE, it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only.

INTERFACE

• Tactile Buttons: Eight user-defined tactile buttons. Each button can be defined differently for each panel (allowing for an unlimited number of functions to be button-controllable)
• Soft Buttons: User-defined soft buttons (which can also be defined differently for each panel as described above).
• Display: 3.5" 240x320 touch screen

ENVIRONMENTAL

• Temperature: 32° to 104°F (0° to 40°C)
• Humidity: 10% to 90% RH (non-condensing)
• Heat Dissipation: Up to ~44 BTU/Hr

GENERAL

• Dimensions (HWD): 4.5" x 4.5" x 1.5" (11.43 cm x 11.43 cm x 3.8 cm)
• Weight: 0.5 lbs (0.23 kg)
• Mounting Options: Flush mount or mount into an existing electrical box using adapter ring
• Regulatory Compliance:FCC, CE, and NTRL