pisode® Wireless Subwoofer Receiver
Do you have a system that wasn't pre-wired for a subwoofer, or a wire that’s in the wrong spot? No need to worry –just go wireless. Use this Episode receiver with the Episode® Wireless Subwoofer Kit, and you can install up to 4 subwoofers anywhere in the room. Now you can customize your installation and tailor the sound field for any area without spending countless hours wiring it.
Easy Placement
With this receiver, it’s easier than ever to place the subwoofer in the sweet spot. Relocate the sub to anywhere there’s an electrical outlet to achieve the best sound possible. Plus, a compact form factor keeps both the transmitter and receiver out of sight. For a quick tutorial on optimum subwoofer placement, check out our video on the Video tab.
Sync Ability
Sync up to 4 receivers to a single transmitter using Easy SYNC technology. After powering up each device, simply press and hold the SYNC button once on each end. The two will automatically connect to each other – and more importantly – stay that way, even if the power goes out.
Reduced Interference
The transmitter and receiver utilize a less-congested 5 GHz transmission with frequency hopping (FSK) for decreased interference and latency. This high-frequency technology is similar to those used in professional and live concert venues, so it’s more immune than traditional consumer products to Wi-Fi signals, microwave ovens, and other RF devices.
Extended Range
With a delay of less than 20 milliseconds, subwoofer signals are instantly transmitted and reproduced. Plus, our engineers have verified the system integrity to up to 30 feet.
Frequency Shift Keying
FSK, or frequency hopping, adds another layer of reliability by automatically finding open frequencies to communicate. If interference is found on one channel, it simply “hops” to anavailable one.
ES-SUB-WIRELESS-RCVR | |
Color
|
Black
|
Connectors
|
RCA
|
Range
|
30 ft. max (10m)
|
Signal to Noise Ratio
|
84 dB
|
Frequency Range
|
10 Hz - 900 Hz
|
Operating Frequencies
|
5200 - 5800 MHz
|
Channel Width
|
< 22 MHz
|
Modulation
|
5 GHz Frequency Hopping; QPSK (DSSS) digital radio
|
Latency
|
< 20 ms
|
Max Input Signal (LFE)
|
1.84V
|
Dimensions (W x H x D)
|
2.20” x 1.12” x 3.35”
|