Next Generation Dual 12" Line Array Loudspeaker
JBL VTX A12 is a complete tour sound solution for mid- to large-size touring applications and high-end fixed installations. VTX A12 was designed from scratch to address the unique challenges of rental companies, FOH engineers and tour sound production crews. Next-generation JBL transducer technology and a high-frequency waveguide design deliver unmatched performance, sensitivity and coverage. A patented JBL rigging mechanism and redesigned suspension system streamline deployment and setup. And refinements to the physical design maximize reliability and versatility, while minimizing size and dramatically reducing weight. VTX A12 isn’t just a superior line array—it’s a completely new way to approach tour sound.
FEATURES
- New and improved JBL transducers for the best output per weight
- Innovative HF section integrates the phasing plug and waveguide for high sensitivity and linearity even at high output levels
- Redesigned Radiation Boundary Integrator® (RBI) for reduced horn edge diffraction, improved LF sensitivity, lower distortion, and 90-degree coverage down to 250 Hz
- Next Generation LF section, including industry-defining Differential Drive woofers, with a dual magnet, dual voice-coil design for extended linear excursion
- Best-in-class rigging for streamlined, rapid deployment
- Full-face grill for superior weatherization and refined aesthetics
- New transport cart and frame for simplified transport and setup
- Optimizations throughout the design for space efficiency and reduced weight while simultaneously improving performance
- Full integration with JBL system control and prediction software
- Lightweight design
TECHNOLOGY
INSIDE THE INNOVATIONS
HIGH-FREQUENCY SECTION
MID-FREQUENCY SECTION
LOW-FREQUENCY SECTION
THE NEW LOOK OF VTX A12
INNOVATIVE RIGGING
SYSTEM INTEGRATION
With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.
|
TRAINING AND SUPPORT
Training and Support
In addition to designing the most sophisticated sound reinforcement system available, JBL Professional provides the expertise to achieve the maximum performance possible. Our 65+ years of expertise in the use of systems in venues around the world is an invaluable resource that is at the core of our training curriculum, helping you to maximize both the use and your investment in the VTX System.
SPECIFICATIONS
Frequency Response | 46 Hz - 19 kHz (Preset: VTX A12) | |
Coverage Pattern | Horizontal: 90 degrees nominal (250Hz - 18kHz) Vertical: Varies with array size and configuration |
|
Max SPL | 146 dB (Preset: VTX A12) | |
System Processing | Crown Audio I-Tech HD Series, Crown Audio I-Tech 4x3500HD | |
IP Rating | IP55 EN (60529) | |
UV Rating | 6 (ISO105-B01) | |
Dimensions (H x W x D) | 330.2mm x 1117.6mm x 495.3mm 13.0in x 44.0in x 19.5in |
|
Weight | 60.8 kg (134.0 lbs) |
ACCESSORIES
VTX A12 AF | Array Frame
The VTX A12 AF is a lightweight Array Frame used for suspending VTX A12 series enclosures. The frame was designed to operate in either single-point, front-to-back or side-by-side suspension modes using the VTX A12 AF EB Extension Bar. The extension bar is compatible with 5/8” shackles and can be stored above the main frame during transportation. The extension bar can extend to the front or the rear of the frame to accommodate both up-tilt and down-tilt aiming options. Three connection points are available for attaching the Extension Bar to the main frame, allowing for precise control of shackle positioning for single-point applications. Support for 3rd party inclinometers is available using the included laser attachment bracket. One VTX A12 AF EB Extension Bar is included and additional Extension Bars can be purchased to facilitate side-by-side suspension.
Highlights:
- Support for up to 24 x VTX A12 enclosures
- Single, front-to-back or side-by-side pick point options
- 0.5-degree pick point resolution
- Built-in storage position for Extension Bar
- Includes 1 x VTX A12 AF EB Extension Bar
- Support for 3rd party laser inclinometers
- Compatible shackle size: 5/8”
- 1 x VTX A12 AF
- 1 x Extension Bar
- 1 x Laser Bracket
- 3 x 5/8” CM Shackles
VTX A12 AF EB | Array Frame Extension Bar
The VTX A12 AF EB Extension Bar was designed to operate in conjunction with the VTX A12 AF Array Frame to facilitate either single-point, front-to-back or side-by-side suspension modes. The extension bar is compatible with 5/8” shackles and can be stored above the main frame during transportation. The extension bar can extend to the front or the rear of the frame to accommodate both up-tilt and down-tilt aiming options. Three connection points are available for attaching the Extension Bar to the main frame, allowing for precise control of shackle positioning for single-point applications. One VTX A12 AF EB Extension Bar is included with the Array Frame and additional Extension Bars can be purchased to facilitate side-by-side suspension.
Highlights:
- Extension Bar for use with VTX A12 AF
- Single, front-to-back or side-by-side pick point options
- 0.5-degree pick point resolution
- Includes 3 x shackles and mounting brackets
- Lightweight design
- Compatible shackle size: 5/8”
- 1 x VTX A12 AF EB
- 3 x 5/8” CM Shackles
- 4 x Extension Bar Attachment Brackets
- 1 x Set of Screws for Bracket Installation
VTX A12 VT | Vertical Transporter
The VTX A12 VT Vertical Transporter is a robust, lightweight cart solution for vertically transporting up to 4 x VTX A12 enclosures. The VTX A12 VT is constructed out of aluminum and steel parts and measures 45” (1143mm) wide and 24” (610mm) deep. Two attachment points are available on each side of the VTX A12 VT for connecting to the optional VTX A12 VT GND Ground Stack outrigger system. When used together, the VTX A12 VT becomes a fast and easy solution for deploying ground-stack arrays without having to remove the cabinets from the cart. The VTX A12 VT comes standard with a hard-top (VT-TOP) attachment that connects to the topmost cabinet of a stack to create a robust and defined footprint that stabilizes the carts during transportation and allows other gear to be placed above for maximum truck-pack efficiency. A reinforced protective cover is available (VTX A12 VT CVR) and supplied separately.
Highlights:
- Vertical transport cart for 4 VTX A12 enclosures
- Truck-friendly dimensions
- Includes a hard top for easy stacking
- Built-in stacking features for easy storage
- Support for ground stacking
- Lightweight design
- Heavy-duty casters
- 1 x Vertical Transporter
- 1 x Top Panel (VT-TOP)
VTX A12 VT CVR | Vertical Transporter Cover
The VTX A12 VT CVR is a heavy-duty soft cover designed to work with the VTX A12 VT vertical transport system. The cover is sized to cover 4 x A12 enclosures and includes 2 x industrial-rated zippers for easy and reliable deployment. The cover includes input-panel flaps, allowing the A12 enclosures to be tested without having to remove the cover. Two handle cut-outs are provided for easy handling, and a clear pocket is provided for shipping labels. The front section panels are internally reinforced for maximum protection of the speaker grills. When not used, the VTX A12 VT CVR folds into a compact footprint and stores within the VTX A12 VT.
Highlights:
- Heavy-duty soft cover for VTX A12 enclosures
- Covers 4 x VTX A12 enclosures on a VTX A12 VT
- Includes input-panel flaps for testing purposes
- Clear see-through pocket for shipping labels
- Handle cut-outs for easy transportation
- Folds and stores in the VTX A12 VT
- Heavy-duty industrial-grade zippers
- 1 x VTX A12 VT CVR
VTX A12 VT GND | Vertical Transporter Ground Stack
The VTX A12 VT GND outrigger system works in conjunction with the VTX A12 VT and allows A12 enclosures to be groundstacked without the need to remove speakers from the transportation cart. The two outriggers extend in front of and behind the stack and connect to the VT using the two included Quick-Release Pins. Screw jacks are used to lift the stack off the ground, and the innovative spring based angle-set hinges are used to adjust aiming. The hinge mechanism uses gas-filled springs, which allow adjustment of the overall stack angle without having to lift the speakers or move any heavy parts.
Highlights:
- Outrigger system for VTX A12 VT
- Support for up to 6 x VTX A12
- 4 screw jacks are included for adjusting height
- Innovative spring based angle-set mechanism
- Compact and lightweight design
- Range: -10 to +10 degrees
- VTX A12 VT not included
- 1 x VTX A12 VT GND
VTX A12 SB | Suspension Bar
The VTX A12 SB accessory is a lightweight suspension bar that can be used as an array frame or to implement pull-back of a VTX A12 array. When used for pull-back, the VTX A12 SB can be attached to the bottom cabinet of an array and connected to a rear suspension point to allow for extra down-tilt, otherwise not possible using the VTX A12 AF alone. The VTX A12 SB can also attach to the top cabinet of an array and used as a compact array frame. In this mode, the suspension bar connects to the top cabinet’s rear rigging points and the down-tilt angle is controlled by the number of cabinets and array geometry. JBL’s Line Array Calculator software application is used to calculate the down-tilt angle. Two VTX A12 SB suspension bars can be used: one at the top and one at the bottom of the array, for dual-point applications and added aiming flexibility. The VTX A12 SB can support the weight of up to 18 x VTX A12 enclosures and a 5/8” shackle (included) can be attached directly to the bar.
Highlights:
- Suspension Bar accessory for VTX A12
- Used for pull-back applications
- Support for suspending VTX A12
- Support for up to 18 x VTX A12 enclosures
- Lightweight design
- Color: black
- Shackle Size: 5/8”
- 1 x VTX A12 SB - Suspension Bar
- 1 x 5/8” CM Shackle
VTX Delta | Delta Plate
The VTX Delta Plate is a rigging accessory used for controlling the horizontal aiming of an array. Two chain motors are attached to the Delta Plate, allowing for adjustments of up to +/- 10 degrees. The VTX Delta Plate can be also used to distribute the weight of an array to two points, and the recommended space between the two pick points is 1 meter (3.3’). The VTX Delta Plate is compatible with all JBL line array products and it can support the weight of up to 24 enclosures. The VTX Delta Plate is made out of high-grade steel and comes with 2 x 5/8” shackles.
Highlights:
- High-quality universal delta plate accessory
- Support for up to 24 x JBL Line Array enclosures
- Allows for up to +/- 10 degrees of horizontal adjustment
- Lightweight design
- Includes 3 x 5/8” shackles
- Recommended point spacing: 1 meter (3.3’)
- Color: black
- 1 x VTX Delta - Rigging delta plate
- 3 x 5/8” CM Shackles