Imágenes adicionales
ls_jbl_stage2_250b_front_qtrleft_with_grille_2_blk_d2
ls_jbl_stage2_250b_front_qtrleft_with_grille_2_blk_d2
ls_jbl_stage2_250b_front_qtrleft_with_grille_2_blk_d2

Jbl Bookshelf Loudspeaker

JBL Stage2 250B 2-Way 5.25-inch (130mm) Bookshelf Loudspeaker (par) Negro


Código: 19-250B-BLK

2-Way 5.25-inch (130mm) Bookshelf Loudspeaker

Designed and engineered at our world-famous Acoustic Engineering Center of Excellence in Northridge, California, the Stage 250B is largest bookshelf loudspeaker of the JBL Stage Series. It provides impressive performance from a small footprint. The 250B's are versatile enough to be used as main speakers or surrounds. This loudspeaker features a 2-way design with Next Generation patented High-Definition Imaging (HDI™) waveguide geometry, 1-inch (25mm) Anodized Aluminum dome tweeter, and a 5.25-inch (130mm) Polycellulose ribbed cone woofer that provides deep, signature JBL bass.

Each speaker in the Stage 2 series features Polycellulose ribbed cone woofers. This pure pulp cone has a proprietary mix of other materials added to improve its rigidity and the ribs echo legendary JBL designs. These woofers produce deep, accurate, room filling bass.

Through intense research of previous waveguide designs, JBL has developed a new complex geometry that improves directivity, reduced diffraction, and an overall neutral frequency response both on and off axis. The Stage 2 HDI Horn is coupled to an anodized aluminum dome tweeter to enhance efficiency and dynamics.

Premium components are used to construct the crossovers fitted to the Stage 2 line. The High frequency section features air core inductors and mylar capacitors that reduce distortion and improve sonic performance. The low frequency section includes laminate core inductors and electrolytic capacitors. These premium materials can handle more power and transmit energy faster elevating system performance.

General Specifications

Type
Bookshelf Loudspeaker System
Low Frequency Driver
5.25-inch (130mm) Polycellulose Ribbed Cone
High Frequency Driver
1-inch (25mm) Anodized Aluminum
Waveguide
Next Generation HDI™
Recommended Amplifier Power
20-150W
Frequency Response ± 6dB
50Hz-25kHz
Sensitivity @ 1M, 2.83V
86dB
Nominal Impedance
6 Ohms
Crossover Frequencies
1.7Khz
Enclosure Tuning
Bass Reflex via Rear-Firing Flared Tuned Port.

Dimensions

Dimensions (HxWxD)
12.6in x 7.9in x 9.5in (353mm x 535mm x 438mm)
Product Weight
12.4 lbs. (5.6 kg)
Shipping Weight
30.0lbs. (13.6kg)
Shipping Units of Measure
Pair