Imágenes adicionales
ls_jbl_stage2_240h_front_qtrleft_pair_wht_d1_1
ls_jbl_stage2_240h_front_qtrleft_pair_wht_d1_1
ls_jbl_stage2_240h_front_qtrleft_pair_wht_d1_1
ls_jbl_stage2_240h_front_qtrleft_pair_wht_d1_1
ls_jbl_stage2_240h_front_qtrleft_pair_wht_d1_1

Jbl Dolby Atmos Surround

JBL Stage2 240H 2-Way 4.5-inch (114mm) Dolby Atmos Surround Sound Loudspeaker (par) Blanco


Código: 19-240H-WHT

2-Way 4.5-inch (114mm) Dolby Atmos® Surround Sound Loudspeaker

Designed and engineered at our world-famous Acoustic Engineering Center of Excellence in Northridge, California, the 240H compact multi-purpose speaker is a truly flexible Stage 2 speaker. With the flip of a switch, it can be set as a Dolby Atmos enabled add-on, or a wall mounted elevation or surround loudspeaker. The 240H features a 2-way way design with Next Generation patented High-Definition Imaging (HDI™) waveguide geometry, 1-inch (25mm) Anodized Aluminum dome tweeter, and a 4.5-inch (114mm) Polycellulose ribbed cone woofer.

The 240H Dolby Atmos enabled height modules are outfitted with the same woofer and horn from the 240B bookshelf model. They are easily connected via binding posts on the top back of both floorstanding models, or surround channels that can be mounted on the wall or ceiling.

Each speaker in the Stage 2 series features Polycellulose ribbed cone woofers. This pure pulp cone has a proprietary mix of other materials added to improve its rigidity and the ribs echo legendary JBL designs. These woofers produce deep, accurate, room filling bass.

Through intense research of previous waveguide designs, JBL has developed a new complex geometry that improves directivity, reduced diffraction, and an overall neutral frequency response both on and off axis. The Stage 2 HDI Horn is coupled to an anodized aluminum dome tweeter to enhance efficiency and dynamics. This new design offers a neutral frequency response both on and off axis.

General Specifications

Type
Dolby Atmos® Surround Sound Loudspeaker System
Low Frequency Driver
4.5-inch (114mm) Polycellulose Ribbed Cone
High Frequency Driver
1-inch (25mm) Anodized Aluminum
Waveguide
Next Generation HDI™
Recommended Amplifier Power
20-150W
Frequency Response ± 6dB
85Hz-25kHz
Sensitivity @ 1M, 2.83V
87dB
Nominal Impedance
6 Ohms
Crossover Frequencies
1.6kHz
Enclosure Tuning
Sealed.

Dimensions

Dimensions (HxWxD)
6.9in x 7.1in x 10.6in (176mm x 180mm x 270mm)
Product Weight
10.1lbs. (4.6 kg)
Shipping Weight
22.9lbs. (10.4kg)
Shipping Units of Measure
Pair.