- 48 Programmable Hard Buttons: For IR and/or RF ZigBee commands programmable via USB on PC or Mac with Compass Navigator™ PC Software
- Programming Support: Unlimited macro and variable actions
- ZigBee Signal Transmission: Up to 100’ through walls, doors and floors
- Device Control: Up to 10 devices with line-of-sight IR control or RF Wireless 2.4 GHz ZigBee control
- Backlight: Motion detected automatic backlighting. The backlight will turn on when movement is detected and will stay on for five seconds after movement has stopped
- USB: Recharging and Programming
- Multiple System Modes:
- Idle Mode: Power Saving mode while remote is not in use
- Active Mode: Device switches to Active Mode after a button is pressed. Stays in Active Mode for 5 seconds
- Low Battery Mode: Activated when the battery has dropped below 2.4V
- Configuration Mode: To setup and configure the remote
- Indication Keys (On/Off):
- Low Battery indicator: Power OFF LED blinks every one second while in active mode
- Battery Charging indicator: Power ON LED blinks every one second while in active mode
- Full Charge indicator: Both Power ON and OFF LEDs blink every one second while in active mode
- Configuration Mode indicator: Both Power ON and OFF LEDs are steadily illuminated
- 7 Device Keys: The selected Device Key LED will remain illuminated to indicate which device is selected
Key Features