Lutron® Maestro LED+™ Dimmer
Lutron’s Maestro LED+™ dimmer is an extremely versatile dimmer for any job. It works with or without a neutral wire and is phase-selectable for controlling a broad range of lighting types. Together, these features deliver a fast, easy retrofittable installation for any age home, with any wiring. It eliminates the task of pairing the right dimmer with the right lighting load and removes the uncertainty of a neutral wire being in the wallbox. Use this dimmer in a RA2 Select system for lighting control in a single room, or throughout an entire home with wireless keypads, occupancy/vacancy sensors, and timeclock events. For additional control in a RA2 Select system, the Maestro LED+ dimmer can be integrated with third-party automation systems and technology, such as professionally installed A/V systems, remote controls, security systems, and voice control.
Advanced Features
Maestro dimmers offer fade-on/fade-off, delayed long fade-to-off, and rapid full-on settings for advanced scene creation in any space. All Maestro controls also incorporate a Front Accessible Service Switch (FASS) for safe lamp replacement.
Easy Installation
Install this dimmer in single-pole or multi-location applications, all in as little as fifteen minutes. Plus, this dimmer’s neutral wire allows for heightened dimming performance with LEDs or other specialized lighting, and a decrease in chance of flickering.
Frequency Range
Maestro controls communicate with the system through Radio Frequency (RF) and must be located within 30 ft. of a repeater. System devices operate on frequencies between 431 MHz and 437 MHz.
Dimmer Capabilities
- On a single-tap, lights fade ON or OFF.
- On a double-tap, lights go to full ON.
- When ON, press and hold the tapswitch to engage the delayed long fade to OFF.
- Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.
LUT-RRD-PRO-SW | |
Color
|
Snow, Satin
|
Line Voltage
|
120 VAC, 50/60
|
Power Output
|
500W (Inc/Halogen/ELV), 400VA (MLV), 250W (LED/CFL)
|
Minimum Load
|
1 bulb (LED/CFL), 5W, Inc/Halogen, 10W (ELV/MLV)
|
Features
|
Load Type: LED, Incandescent, Halogen, ELV, MLV, CFL
|
Control Type: Dimmer | |
Wiring: Neutral wire optional |