Binary™ 900 Series 4K UHD Media over IP Transmitter
Binary™ 900 Series 4K UHD Media over IP Transmitters, when joined in a system with a MoIP Receivers B-900-MOIP-4K-RX and one MoIP Controller B-900-MOIP-4K-CTRLcreate a highly scalable, flexible IP media distribution system delivering visually lossless 4K UHD (HDR 30Hz and HDCP 2.2 compatible) video and all multichannel formats including Dolby Atmos and DTS-X. Operating on a cost-effective gigabit Layer 2 PoE switch, this setup is the fastest and simplest out there. Additionally, OvrC remote management allows for quick system setup, easy troubleshooting with access to live screenshots of source streams and fast, simple firmware updates. MoIP Transmitters also include a selection of audio features that allow dealers to solve issues on every job, including HDMI loop-out, audio injection, audio breakout and the ability to fix the audio to stereo or 5.1 multichannel. Lastly, RS-232-over-IP, 2-way IR routing and custom drivers for popular control systems provide tremendous flexibility in system design.
4K UHD |
PoE |
HDCP 2.2 |
Audio Embed |
HDMI Loopout |
Audio Breakout |
OvrC is your remote on-call technician, a free cloud-control app that makes installs a breeze and helps eliminate truck rolls. Plus, a convenient, end-user app allows your customers to fix small problems on their own, reducing calls and making your life easier.
Visually Lossless 4K Video
MoIP encodes video up to 4K UHD using visually-lossless, variable bit-rate compression technology. The system is HDR and HDCP 2.2 compatible, resulting in an ultra-stable video stream, perfect audio/video sync and ultra-low latency (one frame).
Versatile Audio
Each MoIP transmitter features versatile options for distributing audio. Multichannel audio including Dolby Atmos and DTS:X can be sent to an AV Receiver with the HDMI loop-out. For 2-ch PCM sources, stereo analog can be extracted for routing to multi-room distribution amplifiers, or injected to replace the HDMI audio. Lastly, the source can be forced to output stereo or multichannel to reduce potential complications after you leave the job.
Limitless Control Options
Switching of inputs (TX) to outputs (RX) is done through IP commands from a control system sent to the MoIP controller. Out of the box, the system supports three methods for controlling sources and displays: IR, RS-232 and CEC. Two-way IR routing can be configured from any TX to any or all RX(s), reducing the number of IR outputs required from the control system (no dongles needed). For RS-232 control, commands are sent via IP and generated at each endpoint. Lastly, for more basic installs where display on and standby is all that is needed, MoIP also supports CEC.
Real-Time Video Diagnostics
MoIP provides peace of mind when you leave the job. Not only is it inherently reliable, but there are a host of tools to assist in troubleshooting. Each transmitter provides a live screenshot of the source output, so you can quickly determine if the source is generating video. Additionally, deeper insights are readily available – such as resolution, refresh rate, color depth and HDCP version detected. Best of all, thanks to OvrC, all of this is easily accessed remotely so you can resolve issues caused by unpredictable sources – or customers – without rolling a truck.
Control System Integration
Our engineers have written drivers for the industry’s leading control systems, including Control4, Crestron, ELAN, URC and more – so controlling the system has a familiar feel. Advanced features like IR routing and RS-232 over IP deliver even more flexibility and customization – and we’ve even provided the MoIP controller’s API to create your own drivers if needed
Perfect for Commercial Applications
From small offices to large-scale bars and restaurants, Binary MoIP allows you to distribute multiple sources to any number of screens, or even create stunning video walls. Binary is also compatible with applications like DTVGameControl, which help your clients control and manage their devices.
The Binary MoIP Difference
The Fastest, Simplest Solution
Gone are the days of head-scratching system design, next-level network know-how and confusing configurations. Binary MoIP removes all that complexity, requiring only a Layer 2 PoE switch, so you don’t need a network guru to install it. OvrC-enablement, simple setup and intuitive user-interfaces enable you to go from power-on to picture in 5 minutes or less. View the recommended 210 series and 310 series PoE switches.
Flexible & Scalable
The Binary MoIP solution allows you to fit, scale, and upgrade the solution to match your client’s specific needs. Need a 6x8 for one job and a 7x13 for another one? No problem. What about adding a video wall? Done. Instead of replacing the entire system, you can simply purchase new transmitters or receivers when adding sources or displays.
Ultra-Reliable, Ultra HD
With Binary MoIP, legacy EMI interference and HDCP/EDID issues are eliminated. Each source is encoded, visually lossless, at the highest quality possible (ex. 4K UHD). Then at each display, the signal is decoded from the network and scaled to the desired resolution (ex. 1080p or 4K UHD). Built-in scaling in the RX means that mixed 1080p/4K systems are no longer a problem, plus pass-through of all audio formats like Dolby Atmos and DTS:X are fully supported.
The Power of OvrC
Binary MoIP delivers something no other media product can – award-winning remote management. OvrC quickens initial setup by auto-discovering the controller, plus it provides unparalleled troubleshooting tools like real-time video screenshots.
B-900-MOIP-4K-TX | |
Rack Spacing
|
1U
|
Video Features
|
Interlaced Video Support: Yes
|
HDR Support: HDR 20/24Hz | |
Video Wall Support: Yes, 2x2, 3x3 and 4x4 | |
Video Compression: Visually Lossless | |
Max. HDMI Bandwidth: 8.91Gbps | |
Max. HDMI Pixel Clock: 297MHz | |
Transmitter Video Resolution
|
Up to 4K UHD@60Hz 4:2:0 | 4K HDR@30Hz | 4K UHD@30Hz 4:4:4 8bit
|
Plus Full 1080p HD and lower resolution including interlaced video formats | |
Receiver Video Resolution
|
Up to 4K UHD@30Hz 4:4:4 8 bit
|
HDR Content when available 4K HDR@30Hz 8 bit | |
Integrated scaler to support 4K|HDCP 2.2 on 1080p|HDCP 1.4 displays | |
HDCP Compliance
|
Yes
|
HDMI Connections
|
IN: 1 x 19 pin Type A Female
|
OUT: 1 x 19-pin Type A Female | |
Colorspace
|
RGB, YCbCr
|
Chroma Subsampling
|
4:4:4, 4:2:2, 4:2:0
|
Color Depth
|
8, 10, 12bit
|
Supported Audio Formats
|
2CH PCM, LPCM 2.0, LPCM 5.1, LPCM 7.1, Dolby Digital, Dolby True HD, Dolby Digital Plus, Dolby Atmos, DTS, DTS-HD Master Audio, DTS NeoX
|
Audio Features
|
Audio Sample Rate: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
|
Audio Bit Depth: up to 24-bit | |
Audio Inputs / Outputs
|
Stereo Injection/Audio In: 1 x Mini Stereo 3.5mm Jack (replaces audio on HDMI In)
|
Stereo Breakout/Audio Out: 1 x L/R RCA Audio (Extraction audio only when 2ch audio is present) | |
Analog Audio In: Yes | |
Analog Audio Out: Yes | |
Control Features
|
TX/RX Switching: via MoIP Controller
|
2-Way IR Routing: Yes, independent of video | |
IR Signal Frequency
|
20-60 kHz
|
IR Inputs
|
1 x 3.5mm Stereo (blue), 12V
|
IR Outputs
|
1 x 3.5mm Stereo (green)
|
System Configuration
|
Supports single switch deployments: Yes
|
Supports multiple switch deployments: Yes (multiple gigabit uplink required) | |
On-screen Device Identification: Yes | |
Auto Device Discover: Yes | |
DipSwitch 1 Controls
|
IR RCVR PWR OFF/ON
|
DipSwitch 2 Controls
|
Serial/RS-232 DTE/DCE
|
RS232 Control Desc.
|
RS-232 over IP
|
RS-232 Ports
|
1 x RJ-45 (EIA-561)
|
CEC
|
N/A
|
Networking Features
|
Required Managed Switch: Layer 2 Managed w/ IGMP Snooping
|
Req. Port Throughput: 1Gbps | |
Max. Distance from Switch: 100m (328 ft) | |
Compatible Category Cable: CAT 5E/6/6A/7 | |
Bit Rate
|
150-300 Mbps (Avg) 850 Mbps (Max)
|
Ethernet Ports
|
1 x RJ45 (T568B) LAN + PoE
|
Latency
|
1 frame (16ms - 60Hz, 33ms - 30Hz)
|
Ethernet Pass Through 10/100Mbps
|
10/100/1000 Mbps
|
IP Address
|
Assigned by controller
|
Operating Humidity
|
20-90% RH (no condensation)
|
Operating Temperature
|
32-104°F
|
Storage Temperature
|
-4-140°F
|
Dimensions (W x H x D)
|
w/o rack ears: 8.2" x 0.83" x 4.72"
|
Certifications
|
CE, FCC, RoHS
|
Included Accessories
|
Mounting ears, Mounting ear screws, Rubber feet
|
Sold As
|
Each
|
Power Consumption
|
12VDC 2A (optional accessory)
|
PoE Consumption
|
7.5 Watts (Max)
|
B-900-MOIP-Install-Guide_180710-1447.pdf | |
B-900-MOIP-Network-Guide_180710-1445.pdf | |
B-900-MoIP-Serial_IR_Control_Info_180711_1030.pdf |