Strong™ Low Profile Tilt Mount for Flat Panel TVs
As TVs get thinner and lighter, maximum holding capacities decrease as a result. The Strong™ Tilt Mount for Flat Panel TVs has a slightly reduced weight rating, with the ultimate goal of going slimmer. But rest assured, we did not compromise on build quality. Pick one of these thin TV mounts up to feel the 2.5mm thick steel used to make them, and notice the post-installation leveling screws, built-on lockable tabs, and easy-to-use wall plate to help make your custom AV job that much easier.
Solid Construction
Underneath its beautiful black powder coat, the SM-T mount is 2.5mm (XL is 3mm) of solid steel. Flat panels are getting thinner and thinner, and so should mounts holding them.
Slimmed Down
With TV's getting ultra slim, it was time to trim some weight off our mounts. Our SM-T mounts are only 2-¼" (XL is 2.63") deep for a low profile tilt mount.
Post-Install Leveling
Leveling a mount is fairly straightforward and rather simple – except when you face an unlevel mantle or just slightly sloped ceiling. We understand the pain of having to re-level an installed mount, so our SM-T mounts include post-install leveling screws for last minute adjustments.
LokTight™ Tabs
Our Strong™ fixed and tilt mounts now include LokTight™ rotating lockable tabs directly on the arms themselves. The lockable tabs keep the arms against the mount, eliminate easy lifting from curious kids, and allow for a locking device to be added for security measures.
Friendly Wall-Plate
The center bolt hole location includes a notch so you can drill in a sheetrock screw for temporary hanging. Plus, it's reversible so there is no set top or bottom, which means no confusion. And, the wide mouth in the center allows for easy placement over a large Midi plate.
Strong™ Medium Tilting Mount for 23-36 in. Flat-Panel TV's (Black)
As TV's are getting thinner and lighter, you will see maximum holding capacities decrease as a result - after all, why not? Our new Strong™ SM-F and SM-T mounts have slightly reduced weight ratings with the ultimate goal of going slimmer. But, we did not compromise on build quality to do so. Pick one up, and you will feel the beefy 2.5mm thick steel (that's right between 12 & 13 gauge) used to make them. You will also notice the post installation leveling screws, built-on lockable tabs and easy to use wall plate to help make the job that much easier.
Solid Construction
Underneath it's beautiful black powder coat of the SM-T-M mount is 2.5mm of solid steel. Flat panels are getting thinner and thinner. So should mounts holding them.
Slimmed Down
With TV's getting sexy-slim, it was time to trim some weight off our mounts. Our SM-T-M mounts are only 2-1/4" deep for a low profile tilt mount.
Post Install Leveling
Leveling a mount is fairly straightforward and rather simple - except when you face a unlevel mantle or just slightly sloped ceiling. We understand the pain of having to re-level an installed mount, so our SM-F mounts include post-install leveling screws for last minute adjustments.
LokTight™ Tabs
Most installer worries we surveyed are in regards to kids knocking the TV off the mount, while some are protecting the TV from being stolen. Our new Strong™ fixed and tilt mounts now include LokTight™ rotating lockable tabs directly on the arms themselves. The lockable tabs keep the arms against the mount, eliminate easy lifting from curious kids, and allows for a locking device to be added for security measures.
Friendly Wall-Plate
How so? Well, reason number one is that the center bolt hole location includes a notch so you can drill in a sheetrock screw for temporary hanging. Two, it's reversible so there is no set top or bottom, which means no confusion. Three, the wide mouth in the center allows for easy placement over a large Midi plate.
UL Listed
Strength & integrity are crucial ingredients in flat panel mounts due to how much money they are holding up. Rest assured we understand and continue to uphold our product quality by getting the most effective "guarantee-on-a-box" we can provide - UL approval.
SM-T-XL
|
SM-T-L | SM-T-M | |
Tilt
|
9° Forward / 9° Back
|
13° Forward / 8° Back
|
13° Forward / 8° Back
|
Maximum TV Size
|
90"
|
80"
|
42"
|
Minimum TV Size
|
47"
|
36"
|
22"
|
VESA Mounting Pattern
|
200x300, 300x200, 300x300, 400x300, 400x400, 500x400, 500x500, 600x400, 600x500, 600x600, 700x500, 700x600, 700x700, 800x500, 800x600, 800x700, 900x700, 1000x700
|
200x200, 200x300, 300x200, 300x300, 400x300, 400x400, 500x400, 500x500, 600x400, 600x500, 600x600, 700x500
|
100x100, 100x200, 200x100, 200x200, 200x300, 300x200, 300x300, 400x300
|
Color
|
Black
|
Black
|
Black
|
Depth
|
2.63" Profile
|
2 ¼" Profile
|
2 ¼" Profile
|
Maximum Load Support
|
250 lb
|
165 lb
|
100 lb
|
Construction
|
3mm Steel, Powder Coated Black
|
2.5mm Steel, Powder Coated Black
|
2.5mm Steel, Powder Coated Black
|
Weight
|
16.2 lb
|
8.6 lb
|
6.2 lb
|
VESA Patterns
|
600x600
|
600x600
|
200x200
|