The compact Unite RP bodypack receiver is ideal for guided tours. Interpretation applications and assistive listening are also possible.
Headphones or an induction loop for people with hearing aids can be connected to the mini jack connection (3.5 mm). The Unite RP-T version can also be used with a headset.
Furthermore, the Unite RP-T version has an integrated microphone and talkback button. This talkback function of the receiver allows the dialogue within one group. More guides or speakers can also be actively integrated. A maximum of three people can speak simultaneously within one larger group.
The connection cable of the headphones, headset or the induction loop also serves as an antenna, so that the wearing comfort is not impaired by a separate antenna.
Outside, the operating range is up to 300 m when the transmitter and receiver are in line of sight.
The OLED display provides a brilliant, easy-to-read display of channel, battery status and various menus.
The receiver can either be attached to clothing with the belt clip, or worn around the neck with a neck strap.
The transmitter is powered by an integrated lithium-ion battery pack.
The receiver meets the requirements for accessibility due to raised symbols on the control buttons and braille on the talkback button (Unite RP-T).
All devices are supplied with a predefined group ID and fixed audio encryption allowing quick and easy setup. This allows for quick and easy initial use. The group ID identifies devices that can be placed in a virtual group. For example, all devices within a building, a tour group or a conference room. The transmitter will only transmit the audio signal to a channel with a predefined channel name. If there are several transmitters in a group, the channel for the respective transmitter can be selected on the receiver. You will need to establish a pairing if you require several device groups or secure audio transmission that cannot be intercepted by another group using Unite devices.
EU (Europa)
1,880 to 1,900 MHz
NA (Nord America)
1,920 to 1,930 MHz
JP (Japan)
1,893 to 1,906 MHz
DECT transmission power
Up to 250 mW (peak), depending on the country
DECT operating range
Up to 300 m outside (line of sight);
the actual operating range depends upon the RF output settings, the surroundings, the signal absorption, signal reflection and signal interference
Audio bandwidth
Low quality (SD)
50 Hz - 7 kHz (-3 dB)
High quality (HD)
50 Hz - 14 kHz (-3 dB)
Operating mode
Broadcast and/or full-duplex on all routes
Encryption
AES-256 encryption
Connector for headphones / induction loop (Unite RP)
Connector for headphones / induction loop / headset (Unite RP-T)
4-pin mini jack, 3.5 mm, CTIA Standard.
Display
Monochrome white OLED
display with high contrast
Battery
Lithium-ion battery pack, replaceable by service staff only
Battery monitoring
Battery status of remaining capacity via OLED display
Operating time of battery pack
> 15 hrs.
USB Type C connector
USB 2.0/3.0 standard, compatible to 5 V power supplies only, power consumption max. 500 mA
Strap anchor points
Available, neck strap
removable
Dimensions (W x H x D)
58 x 102 x 15.5 mm
Weight (incl. battery)
105 g
Temperature range:
Charging
0 to +35 °C / +32 to +95°F
Operation
-10 to +40 °C / +14 to +104°F
Storage
-20 to +50 °C / -20 to +122°F
Relative humidity
0 to 90%
Unite RP-T Only:
Integrated microphone
Yes
Side-tone and microphone gain
Individually adjustable
Max. number of open microphones
3 (individual level.
