.jpg)
While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer.
- EQ switch for use with different subwoofers
- Selectable signal-sensing or voltage triggered auto-on/off circuit
- 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms
- Line and speaker level inputs
- Rack ears included
| FREQUENCY RESPONSE: | 20Hz-1kHz 3dB |
| AMPLIFIER: | BASH Hybrid |
| AMPLIFIER POWER: | FTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, |
| LOW PASS CROSSOVER: | Continuously variable from 40-120Hz, |
| ENCLOSURE TYPE: | Use only with RW-5802, and AW-800-SW subwoofer enclosures (either one or two) |
| INPUTS: | 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE |
| OUTPUTS: | 2 Gold-plated unfiltered RCA phono jacks plus single LFE |
| AUTO POWER ON: | 2 second ON delay, 15 minute OFF delay |
| DIMENSIONS: | 3.5" (8.9cm) H x 17" (43.2cm) W x 12.6" (32cm) D (without rack ears) |
| WEIGHT: | 18 lbs. (8.2kg) |
| FINISHES: | Black anodized aluminum face plate |
| FEATURES: | Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included |
| PHASE: | Switchable between 0 and 180 degrees |
| VOLTAGE: | 110/120 VAC 60Hz |
| BUILT FROM: | 2006 |
