OVERVIEW
The NMX-ENC-N2151 4K Encoder and NMX-DEC-N2251 4K Decoder provide users with the industry's most versatile solution for distributing AV over a converged network at resolutions up to 4096×2160. JPEG2000 compression allows Ultra HD media to be switched and distributed over standard Gigabit Ethernet networks. Ultra HD signals from the NMX-ENC-N2151 encoder are provided simultaneously as: 1) a JPEG 2000-compressed 200-600 Mbps stream through the RJ-45 connector or SFP+ port and 2) an uncompressed stream through the small-form-pluggable (SFP+) connector (via a fiber SFP+ module). Any source can be sent to any number of displays by routing through layer-3 switches. System scalability is limited only by uplink and stacking connector bandwidths but can accommodate up to 100 Ultra HD video sources at once.
Standard features like output scaling (decoder), bi-directional serial, IR, embedded 7.1 audio, and KVM-over-IP extension are included. The NMX-ENC-N2151-C and NMX-DEC-N2251-C form-factors are compatible with the NMX-ACC-N9206 card cage for high-density applications.
COMMON APPLICATIONS
The NMX-ENC-N2151 and NMX-DEC-N2251 together create the perfect solution for video matrix applications where resolutions up to 4K are required. Common applications include classrooms, conference rooms, performing arts centers, and sports bars.
FEATURES
< >Output Scaling – Video scaling at the output (decoder) allows seamless switching from any source, at any resolution, to any display or projector, while preserving video fidelityInfrared (IR) – Infrared emitter connection allows control of low-cost, IR-only display devicesOnboard Control – All N-Series encoders and decoders have on-board, built-in control capability via events that can trigger any number of TCP/UDP commands to other IP controllable devicesUnlimited ScalabilityStand Alone or Card – Available as a stand-alone device, or card for use with NMX-ACC-N9206
SPECIFICATIONS
VIDEO
- Signal Types
- Video Input: Network video over Ethernet via RJ45 port
- Video Output: HDMI, DVI-D (through adapter)
- Formats
- HDMI, DVI-D (through adapter), HDCP content protection support
- Output Resolutions
- Supports most common HD up to 4096x2160. See website for all supported resolutions.
AUDIO
- Signal Types
- Input Signal Types: Network audio over Ethernet via RJ45
- Output Signal Types: Embedded audio on DVI-D or HDMI (through adapter)
- HDMI Audio Formats: 8ch PCM
- Analog Audio Format: Stereo 2-channel
- Digital-to-Analog Conversion: 16-bit 32 kHz, 44.1 kHz and 48 kHz (matched to network audio stream settings)
LATENCY
- Uncompressed:
- 25 ms at 60 fps
- 50 ms at 30 fps
- JPEG2000:
- 50 ms at 60 fps
- 100 ms at 30 fps
Note: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency.
Note: Scaling adds one frame of latency (16ms at 60fps)
COMMUNICATIONS
- Ethernet
- P0: 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP
- P1: Full duplex, DHCP, Auto IP, and Static IP 10 Gbps port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling)
PORTS
- +12V 2A: One 12 Volt DC power input
- P0
- 8-wire RJ45 female
- 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port
- Provides network control connections and compressed network AV output
- P1
- SFP+ port (SFP+ fiber transceiver or direct attach cable not included) for uncompressed or compressed networked AV and allows network control connections
- IR
- 2-pin terminal Phoenix connector
- Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included)
- RS232
- 3-pin terminal Phoenix connector
- Provides a serial control interface. Full duplex communication. Available terminal speed settings: 9600-115200 baud rate
- AUDIO
- 5-pin terminal Phoenix connector
- Dedicated audio output
- HDMI OUT: HDMI video output
- USB connectors (front panel): USB-B control input and two USB-A control inputs Currently only the USB-A connectors are supported in software for HID devices
CONTROLS AND INDICATORS – FRONT PANEL
- RESET Button
- Recessed pushbutton
- Press to initiate a 'warm restart' causing the processor to reset, but not lose power. A reset does NOT affect the current settings
- ID Button
- Recessed pushbutton
- Hold 30 seconds for a factory reset of all settings, including IP address settings
- Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command)
- POWER LED
- On solid (green) when operating power is supplied (via PoE or local power supply)
- This activity is also shown by the PWR LED on the rear panel
- STATUS LED
- On flashing (green) when there is software activity
- This activity is also shown by the STAT LED on the rear panel
CONTROLS AND INDICATORS – REAR PANEL
- PWR LED: Same as POWER LED described above
- HDMI LED: On (green) when there is a connection to a valid display
- STAT LED: Same as STATUS LED described above
- STRM LED: On (green) when the unit is streaming video
POWER SUPPLY: Power Supply, External, Included: 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; included in shipment. NMX-ACC-N9312 (FGN9312)
ENVIRONMENTAL
- Temperature: 32° to 104°F (0° to 40°C)
- Humidity: 10% to 90% RH (non-condensing)
- Heat Dissipation: Up to ~62 BTU/Hr
GENERAL
- Dimensions (HWD): 1.05" x 7.888" x 5" (2.67 cm x 20.04 cm x 12.7 cm)
- Weight: 1.4 lbs (0.64 kg)
- Mounting Options:
- Stand alone, surface mount, wall mount, or rack mount
- Surface and wall mounting requires (not included):
- NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver
- Rack mounting requires one of the following (not included):
- NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
- NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
- Regulatory Compliance: FCC, CE, and NTRL
- Recommended Accessories:
- NMX-ACC-N9382 (FGN9382), 1RU Power Supply 16-Channel 12V for up to 16 SVSI N-Series Encoders, Decoders and Audio Transceiver
- NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders, Decoders and Audio Transceiver
- NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders, Decoders and Audio Transceiver
- NMX-ACC-N9206 (FGN9206), 2RU Rack Mount Cage with Power for Six SVSI N-Series Card Units
- NMX-SFP-MM (FGVSFP-SR), Multi-mode 10-Gbps SFP fiber transceiver module for Cisco switches, dual LC connectors, up to 300m
- NMX-SFP-SM (FGVSFP-LR), Single-mode 10-Gbps SFP fiber transceiver module for Cisco switches, dual LC connectors, up to 10-kmSFP modules