- 2269H 18" Differential Drive® dual voice coil dual gap, neodymium magnet transducer
- 2000 watts continuous pink noise,
8000 watts peak power handling capacity - Ultra Long Excursion
- Large vent area for high output with low distortion
- For ground-stacked or suspended applications in stand-alone arrays or in combination with other
AE Series products
Frequency Range (-10 dB) | 22 Hz - 1 kHz | |
Frequency Response (± 3 dB) | 34 Hz - 1 kHz | |
Transducer Power Rating | 2000 W (8000 W peak), 2 hrs | |
Long-Term System Power Rating |
1200 W (4800 W peak), 100 hrs. | |
Maximum SPL (1m) | 25 Hz - 200 Hz: 129 dB-SPL cont avg (135 dB peak) | |
System Sensitivity | 25 Hz - 200 Hz: 96 dB-SPL, 1W (2.83V) @ 1m | |
Nominal Impedance | 8 ohms | |
Low Frequency Driver | 1 x 2269H, 460 mm (18 in) dia., 100 mm (4 in) Dual Coil Dual Gap neodymium Differential Drive® VGC™ driver | |
Enclosure | Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood | |
Suspension Attachment | 16 points (4 top, 4 bottom, 4 each side) M10 threaded hardware | |
Finish | Black DuraFlex™ finish. White available upon request. | |
Grille | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. | |
Input Connector | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. | |
Environmental Specifications | Mil-Std 810; IP-x3 per IEC529. | |
Dimensions (H x W x D in vertical cabinet orientation) |
546 x 560 x 815 mm (21.5 x 22.0 x 32.1 in) |
|
Net Weight | 42.9 kg (94.5 lb) | |
Optional Accessories | M10 x 35 mm forged shoulder eyebolts with washers. |