automated lights exterior

Martin by HARMAN Exterior Dot-HP is a bright, outdoor-rated dot designed to create media facades or perimeter lighting on large buildings and structures for long-distance viewing. This high-performance exterior LED dot for large venues allows for long fixture runs with variable pixel pitches for flexible designs. A creative tool for lighting designers, the Exterior Dot-HP is available in two versions – RGB color mixing or cool white – with a number of front designs for a variety of unique looks. It is driven by the Martin P3 System Controller family for easy setup and video display. The Exterior Dot-HP is also compatible with RDM/DMX for smaller setups.

How processing works for LED video

• High-intensity calibrated video dot
• Rugged IP66 housing for permanent outdoor installations
• Easy setup and long cable runs for clean installation

  Features

  • 100 lumen per dot calibrated
  • Available in clear front, diffuser dome and directional lens variants
  • RGB or cold white LED engine
  • Flexible mounting system allows for customized solutions
  • Local integral in-built diagnostics tool
  • High-quality 16-bit per color image processing technology
  • Pixel-level brightness and color calibration for optimal image quality
  • P3/RDM/DMX controllable (automatic protocol detection)
  • Intuitive mapping and addressing via P3 System Controller
  • Combined power/data input over single cable
  • Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system
     

    Tech Specs

    Physical

    Diameter: 72 mm (2.9 in.)

    Height with clear front: 34 mm (1.4 in.)

    Height with dome front: 49 mm (2 in.)

    Height with directional front: 43 mm (1.7 in.)

    Weight, clear front and dome front models: 300 g (0.7 lbs.)

    Weight, directional front models: 350 g (0.8 lbs.)
    
    Control and Programming

    Control options: Martin P3™ System Controller via Martin P3™

    PowerPort 1500, Martin P3™ PowerPort 1000 IP and/or

    RDM/DMX

    Protocol detection: Automatic

    Control modes: RGB (RGB variants), white intensity (CW

    variants), basic

    DMX channels: 3/10

    Setting and addressing: Martin P3™ System controller or RDM-

    compliant DMX controller

    Control resolution: 16-bit (P3) or 8-bit (DMX) control of each

    color

    Calibration: Color and intensity for each Dot

    DMX compliance: USITT DMX512-A

    RDM compliance: ANSI/ESTA E1.20

    Firmware update: Via Martin P3™ System Controller
    
    Control/User Interface

    Device status: Multi-color visual indication

    Device test and reset: Magnetic button to call up fixture status

    and test fixture
     

    Optics

    Options

    Clear Front

    Dome front

    Directional front (TIR lens)

    LED manufacturer, Exterior Dot-HP RGB: Osram

    LED manufacturer, Exterior Dot-HP CW: Seoul

    Minimum LED lifetime: 50 000 hours (to >70% luminous output)*

    *Figure obtained under manufacturer’s test conditions
    
    Photometric Data

    Color resolution: 16 bits per color (48 bit per pixel)

    Dot pitch: 72 mm - 500 mm (center-to-center)

    Viewing angle

    Clear front: 103° x 103° (half-peak)

    Dome front: 125° x 125° (half-peak)

    Directional front: 22° x 22° (half-peak)

    RGB Dots

    Total output, calibrated mode

    Clear front: 90 lumens, 36 cd

    Dome front: 62 lumens, 18 cd

    Directional front: 72 lumens, 270 cd

    Total output, non-calibrated mode

    Clear front: 120 lumens, 48 cd

    Dome front: 80 lumens, 24 cd

    Directional front: 96 lumens, 360 cd

    Cool White Dots

    Total output, calibrated mode

    Clear front: 160 lumens, 62 cd

    Dome front: 110 lumens, 32 cd

    Directional front: 120 lumens, 590 cd

    Total output, non-calibrated mode

    Clear front: 210 lumens, 82 cd

    Dome front: 142 lumens, 41 cd

    Directional front: 160 lumens, 775 cd
    
    Video Processing

    Brightness control

    Gamma correction and control

    Color temperature control

    Color space control

    Calibration processing

    Synchronization
    
    Signal Protocol

    P3 (via Martin P3™ PowerPort) or RDM/DMX
    
    Construction

    Base: Cast aluminum

    Color: Electrostatic powder-coated (custom colors available by

    special order) (custom colors available on project basis)

    Protection rating: IP66

    Impact resistance: IK05

    Corrosion resistance: C5-M (very high corrosivity / marine, ISO

    12944)RoHS compliant.
    
    Installation

    Orientation: Any

    Mounting points: Direct surface mount, optional mounting plate

    or optional mounting profile
    
    Connections

    Power and data input: 6-pin custom (BBD) IP66-rated

    Power and data thru: 6-pin custom (BBD) IP66-rated

    Hot-pluggable

    
    Electrical

    Nominal input voltage: 48 VDC +/- 4%

    Power supply options: Martin P3™ PowerPort 1500, P3™

    PowerPort 1000 IP, Martin™ IP66 PSU or generic 48 VDC PSU

    Typical total power consumption, calibrated mode: 5 W at full

    intensity, full white

    Typical total power consumption, uncalibrated mode: 7 W at full

    intensity, full white
     

    Thermal

    Cooling: Convection

    Maximum ambient temperature (Ta max.): 55° C (131° F)

    Minimum ambient temperature (Ta min.): -20° C (-4° F)

    Total heat dissipation (calculated, +/- 10%): 20 BTU/hr

    
    Approvals

    EU safety: EN 60950-1, EN 60950-22

    EU EMC: EN 55024, EN 55032 (Class A), EN 61000-3-2, EN

    61000-3-3

    US safety: UL 60950-1, UL 60950-22

    US EMC: FCC Part 15 Class A

    Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22

    Canadian EMC: ICES-003 Class A

    Australia/NZ: RCM

    
    Accesorios

    Herramienta de prueba magnética, juego de 10:  P / N 91610139

    Herrajes de montaje

    Placa de brida para montaje en superficie, aluminio, exterior

    Punto-HP: P / N 91606020

    Kit de perfil de montaje incl. soporte de puntos, tornillos y

    cerradura, Dot-HP Exterior, 57 mm (2.25 in.):  P / N 91606021

    Perfil de Montaje, Dot Exterior / HP Pixline, 320 mm (12.6 in.):  P

    / N 91611620

    Perfil de Montaje, Exterior Dot-HP / Pixline, 1280 mm (50.4 in): P / N 91611610

    Soporte de montaje de

    puntos

    para exterior Dot-HP Perfil de montaje: P

    / N TBA

    Perfil de montaje de cerraduras, Exterior Dot-HP / Pixline,

    juego de 10:  P / N 91611725

    Cables

    Cable de alimentación + datos de entrada, XLR macho de 4

    pines (para P3 PowerPort 1500) a fem. BBD, 0.25 m (0.9 pies): 

     P / N 91616046

    Cable de entrada de alimentación + datos, conector macho XLR

    + cable de 5 pines (para PSU) a BBD hembra, 0.25 m (0.9 pies): 

     P / N 91616048

    Power + Cable de entrada de datos, 5 pines macho XLR +

    macho Martin ™ IP66 PSU a fem. BBD, 0.25 m (0.9 pies):  P / N

    91616050

    Cable de extensión Power + Data, Tipo de instalación CMX,

    BBD-BBD 1 m (3.3 pies):  P / N 91616055

    Cable de extensión Power + Data, Tipo de instalación CMX,

    BBD -BBD, 2.5 m (8.2 pies):  P / N 91616056

    Cable de extensión Power + Data, Tipo de instalación CMX,

    BBD-BBD, 5 m (16.4 ft):  P / N 91616057

    Cable de extensión Power + Data, Tipo de instalación CMX ,

    BBD-BBD, 10 m (32.9 pies): P / N 91616058

    Cable de extensión Power + Data, Tipo de instalación CMX,

    BBD-BBD, 25 m (82.1 ft):  P / N 91616059

    Cable de extensión Power + Data, Tipo de instalación CMX,

    sin conectores, 100 m (328.1 ft) :  P / N 91616060

    Adaptador de

    derivación

    DMX, macho BBD a conector XLR hembra de 5 pines, 0.25

    m (0.9 pies): P / N 91616051

    Adaptador de alimentación + datos XLR5 + XLR4-BBD 0.25 m

    (0.9 pies):  P / N 91616049

    adaptador de corriente + Data BBD-XLR4 0,25 m (0,9 ft.):  P / N

    91616047

    Conectores

    de alimentación + cable de datos Connector, BBD, varón:  P / N

    91611750

    Power + Data cable Conector, BBD, hembra:  P / N 91611751

    blanking tapas para conectores hembra BBD no utilizados,

    juego de 10:  P / N 91616052
    
    Artículos relacionados

    Martin P3 ™ PowerPort 1500:  P / N 90721040

    Martin P3 ™ PowerPort 1000 IP Instalación:  P / N 90721080

    Martin ™ IP66 PSU 240 W fuente de alimentación externa:  

    P / N 90760330

    Martin P3-050 ™ Controlador del sistema:  P / N 90721090

    Martin controlador del sistema P3-150 ™:  P / N 90721015

    Martin controlador del sistema P3-300 ™:  P / N 90721060

    Martin controlador del sistema P3-PC ™:  P / N 90721030
    
    Información para hacer pedidos

    Exterior Dot-HP RGB, Aluminio, Transparente Frente:  P / N 90357683

    Exterior Dot-HP RGB, Aluminio, Parte delantera transparente, juego de 9:  P / N 90357697

    Exterior Dot-HP RGB, Aluminio, Parte delantera del domo:  P / N 90357685

    Exterior Dot-HP RGB, aluminio, domo frontal, juego de 9:  P / N 90357696

    Exterior Dot-HP RGB, aluminio, frontal direccional (lente TIR):  P / N 90357686

    Exterior Dot-HP RGB, aluminio, frontal direccional ( Lente TIR), juego de 9:  P / N 90357698

    Exterior Dot-HP CW, Aluminio, Transparente Frontal:  P / N 90357688

    Exterior Dot-HP CW, Aluminio, Parte delantera transparente, juego de 9:  P / N 90357694

    Exterior Dot-HP CW, Aluminio, Domo frontal:  P / N 90357687

    Exterior Dot-HP CW, Aluminio, Parte frontal del domo, juego de 9:  P / N 90357695

    Exterior Dot-HP CW, Aluminio, Frente direccional (lente TIR):  P / N 90357689

    Exterior Dot-HP CW, Aluminio, Frente direccional (TIR lente), juego de 9:  P / N 90357693