Imágenes adicionales

automated lights exterior

Martin Lighting Exterior Dot-HP Dome Front RGB Color mixing (pieza)



Martin by HARMAN Exterior Dot-HP is a bright, outdoor-rated dot designed to create media facades or perimeter lighting on large buildings and structures for long-distance viewing. This high-performance exterior LED dot for large venues allows for long fixture runs with variable pixel pitches for flexible designs. A creative tool for lighting designers, the Exterior Dot-HP is available in two versions – RGB color mixing or cool white – with a number of front designs for a variety of unique looks. It is driven by the Martin P3 System Controller family for easy setup and video display. The Exterior Dot-HP is also compatible with RDM/DMX for smaller setups.

How processing works for LED video

  • High-intensity calibrated video dot
  • Rugged IP66 housing for permanent outdoor installations
  • Easy setup and long cable runs for clean installation


    • 100 lumen per dot calibrated
    • Available in clear front, diffuser dome and directional lens variants
    • RGB or cold white LED engine
    • Flexible mounting system allows for customized solutions
    • Local integral in-built diagnostics tool
    • High-quality 16-bit per color image processing technology
    • Pixel-level brightness and color calibration for optimal image quality
    • P3/RDM/DMX controllable (automatic protocol detection)
    • Intuitive mapping and addressing via P3 System Controller
    • Combined power/data input over single cable
    • Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system

      Tech Specs

      Diameter: 72 mm (2.9 in.)
      Height with clear front: 34 mm (1.4 in.)
      Height with dome front: 49 mm (2 in.)
      Height with directional front: 43 mm (1.7 in.)
      Weight, clear front and dome front models: 300 g (0.7 lbs.)
      Weight, directional front models: 350 g (0.8 lbs.)

      Control and Programming
      Control options: Martin P3™ System Controller via Martin P3™
      PowerPort 1500, Martin P3™ PowerPort 1000 IP and/or
      Protocol detection: Automatic
      Control modes: RGB (RGB variants), white intensity (CW
      variants), basic
      DMX channels: 3/10
      Setting and addressing: Martin P3™ System controller or RDM-
      compliant DMX controller
      Control resolution: 16-bit (P3) or 8-bit (DMX) control of each
      Calibration: Color and intensity for each Dot
      DMX compliance: USITT DMX512-A
      RDM compliance: ANSI/ESTA E1.20
      Firmware update: Via Martin P3™ System Controller

      Control/User Interface
      Device status: Multi-color visual indication
      Device test and reset: Magnetic button to call up fixture status
      and test fixture
      Clear Front
      Dome front
      Directional front (TIR lens)
      LED manufacturer, Exterior Dot-HP RGB: Osram
      LED manufacturer, Exterior Dot-HP CW: Seoul
      Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
      *Figure obtained under manufacturer’s test conditions

      Photometric Data
      Color resolution: 16 bits per color (48 bit per pixel)
      Dot pitch: 72 mm - 500 mm (center-to-center)
      Viewing angle
      Clear front: 103° x 103° (half-peak)
      Dome front: 125° x 125° (half-peak)
      Directional front: 22° x 22° (half-peak)
      RGB Dots
      Total output, calibrated mode
      Clear front: 90 lumens, 36 cd
      Dome front: 62 lumens, 18 cd
      Directional front: 72 lumens, 270 cd
      Total output, non-calibrated mode
      Clear front: 120 lumens, 48 cd
      Dome front: 80 lumens, 24 cd
      Directional front: 96 lumens, 360 cd
      Cool White Dots
      Total output, calibrated mode
      Clear front: 160 lumens, 62 cd
      Dome front: 110 lumens, 32 cd
      Directional front: 120 lumens, 590 cd
      Total output, non-calibrated mode
      Clear front: 210 lumens, 82 cd
      Dome front: 142 lumens, 41 cd
      Directional front: 160 lumens, 775 cd

      Video Processing
      Brightness control
      Gamma correction and control
      Color temperature control
      Color space control
      Calibration processing

      Signal Protocol
      P3 (via Martin P3™ PowerPort) or RDM/DMX

      Base: Cast aluminum
      Color: Electrostatic powder-coated (custom colors available by
      special order) (custom colors available on project basis)
      Protection rating: IP66
      Impact resistance: IK05
      Corrosion resistance: C5-M (very high corrosivity / marine, ISO
      12944)RoHS compliant.

      Orientation: Any
      Mounting points: Direct surface mount, optional mounting plate
      or optional mounting profile

      Power and data input: 6-pin custom (BBD) IP66-rated
      Power and data thru: 6-pin custom (BBD) IP66-rated

      Nominal input voltage: 48 VDC +/- 4%
      Power supply options: Martin P3™ PowerPort 1500, P3™
      PowerPort 1000 IP, Martin™ IP66 PSU or generic 48 VDC PSU
      Typical total power consumption, calibrated mode: 5 W at full
      intensity, full white
      Typical total power consumption, uncalibrated mode: 7 W at full
      intensity, full white
      Cooling: Convection
      Maximum ambient temperature (Ta max.): 55° C (131° F)
      Minimum ambient temperature (Ta min.): -20° C (-4° F)
      Total heat dissipation (calculated, +/- 10%): 20 BTU/hr

      EU safety: EN 60950-1, EN 60950-22
      EU EMC: EN 55024, EN 55032 (Class A), EN 61000-3-2, EN
      US safety: UL 60950-1, UL 60950-22
      US EMC: FCC Part 15 Class A
      Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22
      Canadian EMC: ICES-003 Class A
      Australia/NZ: RCM

      Herramienta de prueba magnética, juego de 10:  P / N 91610139
      Herrajes de montaje
      Placa de brida para montaje en superficie, aluminio, exterior
      Punto-HP: P / N 91606020
      Kit de perfil de montaje incl. soporte de puntos, tornillos y
      cerradura, Dot-HP Exterior, 57 mm (2.25 in.):  P / N 91606021
      Perfil de Montaje, Dot Exterior / HP Pixline, 320 mm (12.6 in.):  P
      / N 91611620
      Perfil de Montaje, Exterior Dot-HP / Pixline, 1280 mm (50.4 in): P / N 91611610
      Soporte de montaje de
      para exterior Dot-HP Perfil de montaje: P
      / N TBA
      Perfil de montaje de cerraduras, Exterior Dot-HP / Pixline,
      juego de 10:  P / N 91611725
      Cable de alimentación + datos de entrada, XLR macho de 4
      pines (para P3 PowerPort 1500) a fem. BBD, 0.25 m (0.9 pies): 
       P / N 91616046
      Cable de entrada de alimentación + datos, conector macho XLR
      + cable de 5 pines (para PSU) a BBD hembra, 0.25 m (0.9 pies): 
       P / N 91616048
      Power + Cable de entrada de datos, 5 pines macho XLR +
      macho Martin ™ IP66 PSU a fem. BBD, 0.25 m (0.9 pies):  P / N
      Cable de extensión Power + Data, Tipo de instalación CMX,
      BBD-BBD 1 m (3.3 pies):  P / N 91616055
      Cable de extensión Power + Data, Tipo de instalación CMX,
      BBD -BBD, 2.5 m (8.2 pies):  P / N 91616056
      Cable de extensión Power + Data, Tipo de instalación CMX,
      BBD-BBD, 5 m (16.4 ft):  P / N 91616057
      Cable de extensión Power + Data, Tipo de instalación CMX ,
      BBD-BBD, 10 m (32.9 pies): P / N 91616058
      Cable de extensión Power + Data, Tipo de instalación CMX,
      BBD-BBD, 25 m (82.1 ft):  P / N 91616059
      Cable de extensión Power + Data, Tipo de instalación CMX,
      sin conectores, 100 m (328.1 ft) :  P / N 91616060
      Adaptador de
      DMX, macho BBD a conector XLR hembra de 5 pines, 0.25
      m (0.9 pies): P / N 91616051
      Adaptador de alimentación + datos XLR5 + XLR4-BBD 0.25 m
      (0.9 pies):  P / N 91616049
      adaptador de corriente + Data BBD-XLR4 0,25 m (0,9 ft.):  P / N
      de alimentación + cable de datos Connector, BBD, varón:  P / N
      Power + Data cable Conector, BBD, hembra:  P / N 91611751
      blanking tapas para conectores hembra BBD no utilizados,
      juego de 10:  P / N 91616052

      Artículos relacionados
      Martin P3 ™ PowerPort 1500:  P / N 90721040
      Martin P3 ™ PowerPort 1000 IP Instalación:  P / N 90721080
      Martin ™ IP66 PSU 240 W fuente de alimentación externa:  
      P / N 90760330
      Martin P3-050 ™ Controlador del sistema:  P / N 90721090
      Martin controlador del sistema P3-150 ™:  P / N 90721015
      Martin controlador del sistema P3-300 ™:  P / N 90721060
      Martin controlador del sistema P3-PC ™:  P / N 90721030

      Información para hacer pedidos
      Exterior Dot-HP RGB, Aluminio, Transparente Frente:  P / N 90357683
      Exterior Dot-HP RGB, Aluminio, Parte delantera transparente, juego de 9:  P / N 90357697
      Exterior Dot-HP RGB, Aluminio, Parte delantera del domo:  P / N 90357685
      Exterior Dot-HP RGB, aluminio, domo frontal, juego de 9:  P / N 90357696
      Exterior Dot-HP RGB, aluminio, frontal direccional (lente TIR):  P / N 90357686
      Exterior Dot-HP RGB, aluminio, frontal direccional ( Lente TIR), juego de 9:  P / N 90357698
      Exterior Dot-HP CW, Aluminio, Transparente Frontal:  P / N 90357688
      Exterior Dot-HP CW, Aluminio, Parte delantera transparente, juego de 9:  P / N 90357694
      Exterior Dot-HP CW, Aluminio, Domo frontal:  P / N 90357687
      Exterior Dot-HP CW, Aluminio, Parte frontal del domo, juego de 9:  P / N 90357695
      Exterior Dot-HP CW, Aluminio, Frente direccional (lente TIR):  P / N 90357689
      Exterior Dot-HP CW, Aluminio, Frente direccional (TIR lente), juego de 9:  P / N 90357693