Binary™ Single Cat 5e/6 HDMI 3D Extender (130') with Wall Plate Receiver & IR Pass Through Important Notice: To simplify installation, we have made a running design change to this product. Power is no longer supplied to the transmitter s IR input, meaning you don t need to use the IR dongle when connecting it to a control system. Power is still supplied at the receiver s IR input for quick connection of an IR receiver. Also, we ve updated the IR circuitry board to accept from 3.5V to 12V to provide broader support of various IR systems. Important Notice: This product does not fit metal junction boxes. Instead, we recommend using our single gang trim ring – Item# LV1. Shielded CAT5e/CAT6 and shielded RJ45 connectors are strongly recommended for this product. Unshielded or improperly terminated cables may be susceptible to video dropout problems from ceiling fans and other EMI issues. Please note: for proper shielding, shielded connectors must be used with drains connected at both ends. In addition, “EZ end” connectors are not recommended for use with HDMI extenders. Important Notice: Binary 1 Cat HDMI extenders use a 5 Volt DC power supply. Binary HDBaseT extenders use a 24 Volt DC power supply, and matrix switchers with integrated Cat 5 extenders use 12 Volt DC supplies. Using any 12 or 24 Volt DC power supply with any 5 Volt Binary products will result in damage to the product and possibly the power supply. Be sure to use the correct power supply with the correct product! HDMI® (with 3D) Engineered by SnapAV Under the hood of the B-320-1CAT-HDIR-W is an engineer s paradise! These surface-mount, high speed circuits are built on a multi-layer board to give you a solution that is specifically designed for custom install applications. "Engineered by SnapAV" – it s not just a saying, it s what we do. Remote Powering If there's no outlet near your receiver, or you just don't want to play "hide the bulky power supply," you can remotely power the extender. Everything you need is in the box - the removable screw terminal and the female power supply adapter - so just add a 16- or 18-gauge 2-conductor wire, and you're ready go. The power supply can easily go in a rack or other out-of-the-way place. Locking Power Plug Our in-line power supply has a screw lock to secure the power to the unit. No more worries about service calls just because the plug fell out when the TV was moved. To simplify the install even further you can use a single power supply for both transmitter and receiver. Just purchase our WPS-ACC-PWR-F and WPS-ACC-PWR-1X2. Having more options is never a bad thing. That s why this wall plate receiver is specifically designed to fit any single-gang J-box. It comes with a basic white decora plate, but you can swap it out for whatever color matches the install. Built-In ESD and Surge Protection Intelligent circuit design, perfected through extensive hardware testing, has resulted in a very robust product with excellent ESD and surge protection that exceeds CE Level 3 standards. During development, every connection was tortured with an ESD gun and a lightning simulator. They were hit with ESD at 15KV and surges up to 2500V. More important, though, they each lived to tell about it! |
Specifications | ||
---|---|---|
Technical | ||
HDMI compliance | HDMI 3D | |
HDCP Compliance | Yes | |
Video bandwidth | 6.75 Gbps | |
Video support | 480i / 480p / 720p / 1080i / 1080p60 | |
HDMI over UTP Transmission | 1080i/720p 24-bit color: 200 ft (cat5e), 200 ft (cat6) Full HD 1080p 24-bit color: 130 ft (cat5e), 165 ft (cat6) Full HD 1080p 36-bit color: 65 ft (cat5e), 65 ft (cat6) |
|
Signal Equalization | 8-level digital control at RX | |
Input TMDS Signal | 12 Volts (peak-to-peak) | |
Input DDC Signal | 5 Volts (peak-to-peak, TTL) | |
ESD Protection | (1) Human body model — ±15kV (air-gap discharge) & ±8kV (contact discharge) (2) Core chipset — ±8kV |
|
IR Signal (Bi-directional) | Carrier frequency: 20-60KHz | |
Connections | Transmitter | Receiver |
HDBaseT Link | 1xRJ45 | 1xRJ45 |
HDMI | 1xHDMI Type A (19 pin female) | 1xHDMI Type A (19 pin female) |
IR Receiver (In) | -- | 1x3.5mm Stereo |
IR Control In | 1x3.5mm Mono | -- |
IR Flasher (Out) | 1x3.5mm Mono | 1x3.5mm Mono |
Power | Latch-locking | Latch-locking + 2 Conductor |
Controls | Transmitter | Receiver |
Rotary Control Switch | EDID Mode | Distance Signal level |
Mechanical | Transmitter | Receiver |
Housing | Metal Enclosure | |
Dimensions | Width: 3.5" Height: 1" Depth: 2.9" | Width: 1.75" Height: 4.14" Depth: 2.36" |
Weight | 1.1 lbs | |
Power Supply | 5V DC 4A | |
Power consumption | 3 watt (max) | |
Operation Temperature | 32-104F | |
Storage temperature | -4 - 140 F | |
Relative Humidity | 20-90% RH (no condensation) |