Binary™ 520 Series 1080p HDBaseT Extender with IR, RS-232 (In-Wall RX)
This mighty Binary™ HDMI Extender goes the distance – transmitting HDMI signals up to 230 feet over a single Cat 5e/6 cable. Save valuable install time thanks to bi-directional Power over Cable (PoC), which eliminates the need to fit a bulky power supply behind the TV, and “plug and play” technology that bypasses frustrating EQ settings. And say goodbye to clock stretching issues. An embedded circuit ensures that communication between the extender and cable box is crystal clear. For the icing on the cake, you get robust control system integration that includes bi-directional IR and RS-232. Note: The receiver is an in-wall version and fits in dual gang wall plate.
Clock Stretching Solution
This extender features an embedded circuit that solves clock stretching issues, when HDBaseT extenders are paired with some cable boxes.
HDMI with Full 3D Support
This extender offers full support of HDMI® with 3D, Deep Color (36bit) and HDCP 1.4, as well as support for Dolby® True HD, Dolby® Digital Plus, DTS™-HD Master and LPCM audio formats.
Local Outputs HDMI
To make things easier for you, we’ve included output for HDMI at the transmitter, eliminating the need for an external splitter device.
Power Options
The extender pair comes with Power over Cable (POC), meaning the extender can be powered from either side. There’s also an option for remote powering. If there's no outlet near your receiver, you can remotely power the extender. Everything you need is in the box, so just add a 16- or 18-gauge 2-conductor wire, and you're ready to go. The power supply can easily go in a rack or other out-of-the-way place.
Complete Control
Thanks to bi-directional IR and RS-232, you get no-hassle integration with a variety of control systems, and you can easily send IR signals from the TV location back to cable boxes, DVD players, and other source equipment at the head end. The IR connections feature active circuitry that supports a wide variety of IR and control system types.
A Perfect Fit
Having more options is never a bad thing. That’s why this wall plate receiver is specifically designed to fit any dual-gang J-box. It comes with a basic white decora plate, but you can swap it out for whatever color matches the install.
IR Flexibility
The dip switch gives you better install flexibility by providing power when connected to an IR receiver or by shutting off when connected to control systems.
Easy Firmware Upgrades
You never know when a new TV or BluRay player is going to throw you a curve ball. Upgradable firmware gives our software team the ability to update the system to handle any issues. Just flip the switch on the RS-232 port and upgrade on-site.
Built-In ESD and Surge Protection
Intelligent circuit design, perfected through extensive hardware testing, has resulted in a robust product with excellent ESD and surge protection that exceeds CE Level 3 standards. During development, every connection was tested with an ESD gun and a lightning simulator. They were hit with ESD at 15KV and surges up to 1600V.
Package Contents:
- (1) HDBaseT Extender Transmitter
- (1) HDBaseT Extender Receiver as in-wall
- (1) 12V Power supply
- (2) Rack ears
- (4) screws
- (4) Rubber feet
- (1) Dual gang wall plate
- (2) HDBaseT Label
B-520-EXT-230-RS-W | |
Transmission Distance - 4K/Ultra HD
|
Ultra HD 4K2K@30 Hz (4:2:0) : 114 ft (Cat5e/6), 131 ft (Cat6a/7)
|
Transmission Distance - HD
|
Full HD 1080p 36-bit deep color: 200 ft (Cat5e/6), 230 ft (Cat6a/7)
|
Full HD 1080p 24-bit color: 200 ft (Cat5e/6), 230 ft (Cat6a/7) | |
1080i/720p 24-bit color: 200 ft (Cat5e/6), 230 ft (Cat6a/7) | |
HDMI Compliance
|
HDMI 3D
|
HDCP Compliance
|
Yes
|
Supported Video Bandwidth
|
10.2 Gbps
|
Input TMDS Signal
|
1.2 Volts (peak-to-peak)
|
Input DDC Signal
|
5 Volts (peak-to-peak, TTL)
|
ESD Protection
|
(1) Human body model — ±5kV (air-gap discharge) & ±8kV (contact discharge) (2) Core chipset — ±8kV
|
IR Signal Frequency
|
Carrier frequency: 20-60kHz
|
HDBaseT Connections
|
Transmitter: 1x RJ45
|
Receiver: 1x RJ45 | |
HDMI Connections
|
Transmitter: 1x HDMI Type A(19-pin female)
|
Receiver: 1x HDMI Type A(19-pin female) | |
IR Receivers
|
Transmitter: 3.5mm Stereo/Mono
|
Receiver: 3.5mm Stereo/Mono | |
IR Flashers
|
Transmitter: 1x 3.5mmMono
|
Receiver: 1x 3.5mmMono | |
RS-232 Ports
|
Transmitter: DB-9
|
Receiver: DB-9 | |
DipSwitch 1 Controls
|
IR RCVR PWR OFF/ON
|
DipSwitch 2 Controls
|
RS-232 Pin Configuration (DCE /DTE)
|
DipSwitch 3 Controls
|
RS-232 Operation Mode (SERVICE/LINK)
|
DipSwitch 4 Controls
|
EDID – HDBT EDID/AUTO EDID
|
Dimensions (W x H x D)
|
Transmitter: 6.25" x 3.1" x 1.3"
|
Receiver: 3.48" x 2.8" x 0.66" | |
Weight
|
1.1 lb
|
Line Voltage
|
12V DC, 2A
|
Power Consumption
|
12W (max)
|
Operating Temperature
|
32-104°
|
Storage Temperature
|
-4 - 140°F
|
Certifications
|
CE, FCC, RoHS
|